[U-Boot] [PATCH 1/6] drivers: serial: serial_omap: populate default clock frequency when not found in dt

[Mugunthan V N]

In some platforms like am437x, serial node is not populated with
clock-frequency node. So in that case have a default clock-clock
frequency.

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 drivers/serial/serial_omap.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c
index e8d544f..9709444 100644
--- a/drivers/serial/serial_omap.c
+++ b/drivers/serial/serial_omap.c
@@ -12,6 +12,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */
+
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct udevice_id omap_serial_ids[] = {
 	{ .compatible = "ti,omap3-uart" },
@@ -28,7 +30,7 @@ static int omap_serial_ofdata_to_platdata(struct udevice *dev)
 	if (ret)
 		return ret;
 	plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-				     "clock-frequency", -1);
+				     "clock-frequency", DEFAULT_CLK_SPEED);
 	plat->reg_shift = 2;
 
 	return 0;
-- 
2.6.0.rc2.10.gf4d9753