[U-Boot] Issue with USB mass storage (thumb drives)

Marek Vasut marex at denx.de
Tue Apr 19 01:54:42 CEST 2016


On 04/15/2016 02:13 PM, Diego wrote:
> In data venerdì 15 aprile 2016 12:53:36, Marek Vasut ha scritto:
>> On 04/14/2016 03:20 PM, Diego wrote:
>>> On 18.02.2016, Schrempf Frieder wrote:
>>>> At the moment I have two sticks with the same chip around for which
>>>> setting USB_MAX_XFER_BLK from 65535 to 32767 fixed the file transfer.
>>>> Also one of our customers tested a few non-working sticks with this
>>>> change and reported, that it fixed it for him.
>>>
>>> Hi all,
>>>
>>> sorry for reopening this thread, but I'd like to provide some additional
>>> infos.
>>>
>>> I was experiencing the same problem with several USB thumb drives,
>>> especially with some Kingston DataTraveler.
>>>
>>> Changing USB_MAX_XFER_BLK from 65535 to 32767 definitely fixed the "EHCI
>>> timed out on TD" but also fixed a more subtle problem.
>>
>> So the DTSE9 is problematic even on EHCI ? Sigh ... I'll have to look
>> into that one stick deeper, that's real bad.
>>
> 
> Hi Marek,
> 
> yes, I was getting the following error with the Kingston DTSE9 USB 2.0:
> EHCI timed out on TD - token=0x1e008d80
> EHCI timed out on TD - token=0x1e008d80
> EHCI timed out on TD - token=0x1e008d80
> The model is the one in this photo:
> http://katteway.com/images/Kingston-DataTraveler-DTSE9-8GB-USB-Flash-Drive-Silver.jpg
> ID 0951:1689 Kingston Technology DataTraveler SE9
> 
> I'm available if you want any additional info.

I have the same stick and the same problems, but I should be able to
check it with USB analyzer this or next week.

-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list