[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x

[Chris Packham]

From: Chris Packham <chris.packham at alliedtelesis.co.nz>

Add pin control settings for the NAND flash interface. This interface
is multiplexed with the device bus interface to the function is "dev"
not "nand" as one might expect.

Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
Cc: Luka Perkov <luka.perkov at sartura.hr>
Cc: Dirk Eibach <eibach at gdsys.de>
---
I don't think this is strictly necessary. A quick scan of boards that
use this family of processor all seem to set their MPP configurations
manually.

Another issue is that technically on the Armada-385 there are 4 possible
CE pins. The board I'm looking at happens to use CE#0 (mpp25) but mpp26,
mpp27 and mpp6 are all potentially available. I guess if any boards
actually use them they can add them to their pin specification. At the
very least such boards would need to update the num-cs property anyway.

 arch/arm/dts/armada-38x.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi
index dc8a1a6..9ecba8a 100644
--- a/arch/arm/dts/armada-38x.dtsi
+++ b/arch/arm/dts/armada-38x.dtsi
@@ -258,6 +258,14 @@
 					marvell,function = "i2c0";
 				};
 
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
+						       "mpp38", "mpp28", "mpp40", "mpp42",
+						       "mpp35", "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
 				mdio_pins: mdio-pins {
 					marvell,pins = "mpp4", "mpp5";
 					marvell,function = "ge";
-- 
2.9.2.518.ged577c6.dirty