[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target

Fabio Estevam festevam at gmail.com
Fri Aug 26 02:07:18 CEST 2016


From: Fabio Estevam <fabio.estevam at nxp.com>

NXP kernel expects to boot in secure mode, so introduce
warp7_secure_defconfig target which selects CONFIG_ARMV7_BOOT_SEC_DEFAULT.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
Changes since v1:
- None

 configs/warp7_secure_defconfig | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 configs/warp7_secure_defconfig

diff --git a/configs/warp7_secure_defconfig b/configs/warp7_secure_defconfig
new file mode 100644
index 0000000..34fcdea
--- /dev/null
+++ b/configs/warp7_secure_defconfig
@@ -0,0 +1,36 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_TARGET_WARP7=y
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_OF_LIBFDT=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
-- 
1.9.1



More information about the U-Boot mailing list