[U-Boot] [PATCH v3 00/11] SF: Cadence QSPI driver fixes and clean up

[Jagan Teki]

On Tue, Nov 29, 2016 at 1:58 PM, Phil Edworthy
<phil.edworthy at renesas.com> wrote:
> This series has fixes, patches to clean the code up, and add support for
> specifying the sampling edge.
>
> Main changes in v3:
>   1. Added "spi: cadence_qspi: Use spi mode at the point it is needed" to
>      address comments for SPI pol/phase code.
>   2. "spi: cadence_qspi: Support specifying the sample edge used" has been
>      split into 3 separate patches.
>
>
> Phil Edworthy (11):
>   spi: cadence_qspi: Fix clearing of pol/pha bits
>   spi: cadence_qspi: Fix baud rate calculation
>   spi: cadence_qspi: Better debug information on the SPI clock rate
>   spi: cadence_qspi: Use #define for bits instead of bit shifts
>   spi: cadence_qspi: Clean up the #define names
>   spi: cadence_qspi: Use spi mode at the point it is needed
>   spi: cadence_qspi: Remove returns from end of void functions
>   spi: cadence_qspi: Fix CS timings
>   spi: cadence_qspi: Move DT prop code to match layout

Applied to u-boot-spi/master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.