[U-Boot] [PATCH v2 10/30] arm: socfpga: arria10: add reset manager for Arria10

Chee Tien Fong tien.fong.chee at intel.com
Thu Dec 29 06:44:38 CET 2016


From: Dinh Nguyen <dinguyen at opensource.altera.com>

Add the defines for the reset manager and some basic reset functionality.

Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
---
 arch/arm/mach-socfpga/include/mach/reset_manager.h | 65 ++++++++++++++++++++++
 arch/arm/mach-socfpga/reset_manager.c              | 24 +++++++-
 2 files changed, 88 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
index 2f070f2..6225118 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -15,6 +15,7 @@ void socfpga_bridges_reset(int enable);
 void socfpga_per_reset(u32 reset, int set);
 void socfpga_per_reset_all(void);
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_reset_manager {
 	u32	status;
 	u32	ctrl;
@@ -28,6 +29,42 @@ struct socfpga_reset_manager {
 	u32	padding2[12];
 	u32	tstscratch;
 };
+#else
+struct socfpga_reset_manager {
+	u32	stat;
+	u32	ramstat;
+	u32	miscstat;
+	u32	ctrl;
+	u32	hdsken;
+	u32	hdskreq;
+	u32	hdskack;
+	u32	counts;
+	u32	mpu_mod_reset;
+	u32	per_mod_reset;	/* stated as per0_mod_reset in A10 datasheet */
+	u32	per2_mod_reset;	/* stated as per1_mod_reset in A10 datasheet */
+	u32	brg_mod_reset;
+	u32	misc_mod_reset;	/* stated as sys_mod_reset in A10 datasheet */
+	u32	coldmodrst;
+	u32	nrstmodrst;
+	u32	dbgmodrst;
+	u32	mpuwarmmask;
+	u32	per0warmmask;
+	u32	per1warmmask;
+	u32	brgwarmmask;
+	u32	syswarmmask;
+	u32	nrstwarmmask;
+	u32	l3warmmask;
+	u32	tststa;
+	u32	tstscratch;
+	u32	hdsktimeout;
+	u32	hmcintr;
+	u32	hmcintren;
+	u32	hmcintrens;
+	u32	hmcintrenr;
+	u32	hmcgpout;
+	u32	hmcgpin;
+};
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2
@@ -55,6 +92,7 @@ struct socfpga_reset_manager {
 #define RSTMGR_BANK(_reset)			\
 	(((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK)
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
  * 0 ... mpumodrst
@@ -75,6 +113,33 @@ struct socfpga_reset_manager {
 #define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
 #define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
+#else
+/*
+ * SocFPGA Arria10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ * 4 ... sysmodrst
+ */
+#define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_EMAC2		RSTMGR_DEFINE(1, 2)
+#define RSTMGR_L4WD0		RSTMGR_DEFINE(2, 0)
+#define RSTMGR_L4WD1		RSTMGR_DEFINE(2, 1)
+#define RSTMGR_L4SYSTIMER0	RSTMGR_DEFINE(2, 2)
+#define RSTMGR_L4SYSTIMER1	RSTMGR_DEFINE(2, 3)
+#define RSTMGR_SPTIMER0		RSTMGR_DEFINE(2, 4)
+#define RSTMGR_SPTIMER1		RSTMGR_DEFINE(2, 5)
+#define RSTMGR_UART0		RSTMGR_DEFINE(2, 16)
+#define RSTMGR_UART1		RSTMGR_DEFINE(2, 17)
+#define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 17)
+#define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 18)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 6)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 7)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 16)
+#define RSTMGR_DDRSCH		RSTMGR_DEFINE(3, 6)
+#endif
 
 /* Create a human-readable reference to SoCFPGA reset. */
 #define SOCFPGA_RESET(_name)	RSTMGR_##_name
diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c
index b6beaa2..d0ff6c4 100644
--- a/arch/arm/mach-socfpga/reset_manager.c
+++ b/arch/arm/mach-socfpga/reset_manager.c
@@ -18,7 +18,9 @@ static const struct socfpga_reset_manager *reset_manager_base =
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
-/* Assert or de-assert SoCFPGA reset manager reset. */
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
 void socfpga_per_reset(u32 reset, int set)
 {
 	const void *reg;
@@ -46,13 +48,29 @@ void socfpga_per_reset(u32 reset, int set)
  * Assert reset on every peripheral but L4WD0.
  * Watchdog must be kept intact to prevent glitches
  * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
  */
 void socfpga_per_reset_all(void)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
 
 	writel(~l4wd0, &reset_manager_base->per_mod_reset);
 	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
+#else
+	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+
+	unsigned mask_ecc_ocp = 0x0000FF00;
+
+	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
+	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
+
+	/* Finally disable the ECC_OCP */
+	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
+#endif
 }
 
 /*
@@ -71,6 +89,7 @@ void reset_cpu(ulong addr)
 		;
 }
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 /*
  * Release peripherals from reset based on handoff
  */
@@ -78,6 +97,7 @@ void reset_deassert_peripherals_handoff(void)
 {
 	writel(0, &reset_manager_base->per_mod_reset);
 }
+#endif
 
 #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 void socfpga_bridges_reset(int enable)
@@ -92,6 +112,7 @@ void socfpga_bridges_reset(int enable)
 
 void socfpga_bridges_reset(int enable)
 {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
 				L3REGS_REMAP_HPS2FPGA_MASK |
 				L3REGS_REMAP_OCRAM_MASK;
@@ -116,5 +137,6 @@ void socfpga_bridges_reset(int enable)
 		/* Remap the bridges into memory map */
 		writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
 	}
+#endif
 }
 #endif
-- 
2.2.2



More information about the U-Boot mailing list