[U-Boot] Problem with mounting a jffs2 partition on flash.

[Marek Vasut]

On 02/11/2016 01:45 PM, Bakhvalov, Denis (Nokia - PL/Wroclaw) wrote:
> Hi Marek,
> 
> Here are my build steps:
> 
> denis at DendiMachine:~/WorkSpace/u-boot$ make clean
>   CLEAN   dts/../arch/arm/dts
>   CLEAN   dts
>   CLEAN   examples/standalone
>   CLEAN   tools
>   CLEAN   tools/lib tools/common
>   CLEAN   spl/arch spl/board spl/cmd spl/common spl/drivers spl/dts spl/fs spl/lib spl/u-boot-spl spl/u-boot-spl.bin spl/u-boot-spl.cfg spl/u-boot-spl.dtb spl/u-boot-spl-dtb.bin spl/u-boot-spl.lds spl/u-boot-spl.map spl/u-boot-spl-nodtb.bin spl/u-boot-spl-pad.bin spl/u-boot-spl.sfp
>   CLEAN   u-boot u-boot.bin u-boot.cfg u-boot.dtb u-boot-dtb.bin u-boot-dtb.img u-boot.img u-boot.lds u-boot.map u-boot-nodtb.bin u-boot.srec System.map
> denis at DendiMachine:~/WorkSpace/u-boot$ make distclean
>   CLEAN   scripts/basic
>   CLEAN   scripts/kconfig
>   CLEAN   include/config include/generated spl
>   CLEAN   .config .config.old include/autoconf.mk include/autoconf.mk.dep include/config.h
> denis at DendiMachine:~/WorkSpace/u-boot$ make clean
> denis at DendiMachine:~/WorkSpace/u-boot$ make distclean
> denis at DendiMachine:~/WorkSpace/u-boot$ git pull
> Already up-to-date.
> denis at DendiMachine:~/WorkSpace/u-boot$ git describe
> v2016.03-rc1-138-gcc8d698

I see , so you're not building 2016.01 , but 2016.03-rc .

> denis at DendiMachine:~/WorkSpace/u-boot$ git status
> On branch master
> Your branch is up-to-date with 'origin/master'.
> 
> Changes not staged for commit:
>   (use "git add <file>..." to update what will be committed)
>   (use "git checkout -- <file>..." to discard changes in working directory)
> 
> 	modified:   include/configs/socfpga_arria5_socdk.h    // here I only changed SDRAM configuration
> 
> no changes added to commit (use "git add" and/or "git commit -a")
> denis at DendiMachine:~/WorkSpace/u-boot$ make socfpga_arria5_defconfig
>   HOSTCC  scripts/basic/fixdep
>   HOSTCC  scripts/kconfig/conf.o
>   SHIPPED scripts/kconfig/zconf.tab.c
>   SHIPPED scripts/kconfig/zconf.lex.c
>   SHIPPED scripts/kconfig/zconf.hash.c
>   HOSTCC  scripts/kconfig/zconf.tab.o
>   HOSTLD  scripts/kconfig/conf
> #
> # configuration written to .config
> #
> denis at DendiMachine:~/WorkSpace/u-boot$ make -j9
> 
> But after compilation I don't have such file.
> 
> I have installed:
> - linaro toolchain
> - u-boot-tools
> - device-tree-compiler

OK, there has been a patch applied after 2016.01 which renames the
artifacts. I expected it to cause confusion, but I didn't expect it
to happen so soon. And the patch is even broken, sigh.

Do this after make -j9 as a workaround for the breakage:

$ make u-boot-with-spl.sfp

And then use the "u-boot-with-spl.sfp" file and place it into the QSPI
NOR. I will send a fix for the broken patch.

> All env variables should be ok, because in other way it won't compile.
> 
> make u-boot-with-spl-dtb.sfp doesn't work for me because there is no such target in Makefile.
> What I'm doing wrong?
> I will try to clone sources and build it from the scratch.
> 
> Best regards,
> Denis Bakhvalov
>