[U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model

[Christophe Henri RICARD]

Hi Jagan,

Apologies for the delay, i got busy on other non u-boot topic.

I have been reviewing and tried to applied your patches but it seems patches 3/4/5 got some formatting issues (due to mailbox client may be ?).
I think I should be able to test this work anyway. Do you want me to send back the whole serie I have tested as a ack and tested by ?

I will answer back on each patch where I got the issue.

Best Regards
Christophe

-----Original Message-----
From: Jagan Teki [mailto:jteki at openedev.com] 
Sent: lundi 29 février 2016 13:45
To: u-boot at lists.denx.de
Cc: Christophe Henri RICARD; Simon Glass; Tom Rini; Jagan Teki
Subject: Re: [PATCH v4 0/5] dm: omap3_spi: Convert to driver model

Christophe/All,

On 22 February 2016 at 18:11, Jagan Teki <jteki at openedev.com> wrote:
> Christophe,
>
> Please test this series if you have hw.
>
> On 22 February 2016 at 18:09, Jagan Teki <jteki at openedev.com> wrote:
>> Changes for v4:
>>         - rebase to master
>> Changes for v3:
>>         - Add DECLARE_GLOBAL_DATA_PTR Changes for v2:
>>         - Added dm pindir-d0-out-d1-in logic
>>         - Updated comment about 4-wire master mode as per Linux.
>>
>> Christophe Ricard (2):
>>   spi: omap3: Remove unused variable irqstatus in omap3_spi_txrx
>>   spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN
>>
>> Jagan Teki (3):
>>   spi: omap3: Move headers code inside the driver
>>   spi: omap3: Make local functions as static
>>   spi: omap3: Convert to driver model

Can any one test these 3 patches?

thanks!
--
Jagan.