[U-Boot] [PATCH 1/3] wandboard: Replace is_cpu_type() for macro

[Stefano Babic]

On 22/07/2016 14:11, Breno Lima wrote:
> It's not necessary to use the is_cpu_type function, there is a macro in
> sys_proto.h already implemented.
> 
> Signed-off-by: Breno Lima <breno.lima at nxp.com>
> ---
>  board/wandboard/wandboard.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
> index 8340dd1..d7c1142 100644
> --- a/board/wandboard/wandboard.c
> +++ b/board/wandboard/wandboard.c
> @@ -390,7 +390,7 @@ int board_late_init(void)
>  #endif
>  
>  #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> -	if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
> +	if (is_mx6dq())
>  		setenv("board_rev", "MX6Q");
>  	else
>  		setenv("board_rev", "MX6DL");
> @@ -409,7 +409,7 @@ int board_init(void)
>  	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>  
>  	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
> -	if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
> +	if (is_mx6dq())
>  		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info);
>  	else
>  		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================