[U-Boot] [PATCH v2] x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support

[Bin Meng]

On Wed, Mar 16, 2016 at 4:18 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
> On Wed, Mar 16, 2016 at 3:48 PM, Stefan Roese <sr at denx.de> wrote:
>> This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
>> installed on the congatec Qseven 2.0 evaluation carrier board
>> (conga-QEVAL).
>>
>> Its port is very similar to the MinnowboardMAX port and also uses
>> the Intel FSP as described in doc/README.x86.
>>
>> Currently supported are the following interfaces / devices:
>> - UART (via Winbond legacy SuperIO chip on carrier board)
>> - Ethernet (PCIe Intel I210 / E1000)
>> - SPI including SPI NOR as boot-device
>> - USB 2.0
>> - SATA via U-Boot SCSI IF
>> - eMMC
>> - Video (HDMI output @ 800x600)
>> - PCIe
>>
>> Not supported yet is:
>> - I2C
>> - USB 3.0
>>
>> Signed-off-by: Stefan Roese <sr at denx.de>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Bin Meng <bmeng.cn at gmail.com>
>> ---
>> v2:
>> - Rebased on u-boot-x86/master
>> - Fixed spelling of Bay Trail in commit subject
>> - Removed unreferenced CONFIG_WINBOND from config header
>> - Moved Intel E1000 from config header to defconfig
>>
>>  arch/x86/Kconfig                                   |   4 +
>>  arch/x86/dts/Makefile                              |   1 +
>>  arch/x86/dts/conga-qeval20-qa3-e3845.dts           | 278 +++++++++++++++++++++
>>  board/congatec/Kconfig                             |  29 +++
>>  board/congatec/conga-qeval20-qa3-e3845/Kconfig     |  28 +++
>>  board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS |   7 +
>>  board/congatec/conga-qeval20-qa3-e3845/Makefile    |   7 +
>>  .../conga-qeval20-qa3-e3845/conga-qeval20-qa3.c    |  31 +++
>>  board/congatec/conga-qeval20-qa3-e3845/start.S     |   9 +
>>  configs/conga-qeval20-qa3-e3845_defconfig          |  47 ++++
>>  include/configs/conga-qeval20-qa3-e3845.h          |  65 +++++
>>  11 files changed, 506 insertions(+)
>>  create mode 100644 arch/x86/dts/conga-qeval20-qa3-e3845.dts
>>  create mode 100644 board/congatec/Kconfig
>>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Kconfig
>>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
>>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Makefile
>>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c
>>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/start.S
>>  create mode 100644 configs/conga-qeval20-qa3-e3845_defconfig
>>  create mode 100644 include/configs/conga-qeval20-qa3-e3845.h
>>
>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>

rebased on top of Simon's broadwell patch series, and applied to
u-boot-x86, thanks!