[U-Boot] [PATCH v2] mx6sabresd: Use VESA 1024x768 timings

[Stefano Babic]

On 16/03/2016 16:55, Fabio Estevam wrote:
> VESA 1024x768 results in much more accurate timings.
> 
> Based on the patch from Soeren Moch for the tbs2910 board.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
> Changes since v1:
> - Fix Soeren's name
> 
>  board/freescale/mx6sabresd/mx6sabresd.c | 28 ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
> index e9d9664..727334a 100644
> --- a/board/freescale/mx6sabresd/mx6sabresd.c
> +++ b/board/freescale/mx6sabresd/mx6sabresd.c
> @@ -386,13 +386,13 @@ struct display_info_t const displays[] = {{
>  		.refresh        = 60,
>  		.xres           = 1024,
>  		.yres           = 768,
> -		.pixclock       = 15385,
> -		.left_margin    = 220,
> -		.right_margin   = 40,
> -		.upper_margin   = 21,
> -		.lower_margin   = 7,
> -		.hsync_len      = 60,
> -		.vsync_len      = 10,
> +		.pixclock       = 15384,
> +		.left_margin    = 160,
> +		.right_margin   = 24,
> +		.upper_margin   = 29,
> +		.lower_margin   = 3,
> +		.hsync_len      = 136,
> +		.vsync_len      = 6,
>  		.sync           = FB_SYNC_EXT,
>  		.vmode          = FB_VMODE_NONINTERLACED
>  } }, {
> @@ -406,13 +406,13 @@ struct display_info_t const displays[] = {{
>  		.refresh        = 60,
>  		.xres           = 1024,
>  		.yres           = 768,
> -		.pixclock       = 15385,
> -		.left_margin    = 220,
> -		.right_margin   = 40,
> -		.upper_margin   = 21,
> -		.lower_margin   = 7,
> -		.hsync_len      = 60,
> -		.vsync_len      = 10,
> +		.pixclock       = 15384,
> +		.left_margin    = 160,
> +		.right_margin   = 24,
> +		.upper_margin   = 29,
> +		.lower_margin   = 3,
> +		.hsync_len      = 136,
> +		.vsync_len      = 6,
>  		.sync           = FB_SYNC_EXT,
>  		.vmode          = FB_VMODE_NONINTERLACED
>  } }, {
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================