[U-Boot] [PATCH 1/7] serial: sh: Add support R8A7795

[Nobuhiro Iwamatsu]

From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx at renesas.com>

This can be used in the same way as other R-CAR serial setting.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx at renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 drivers/serial/serial_sh.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index cbc2929..a95684b 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -225,7 +225,8 @@ struct uart_port {
 # define SCIF_ORER 0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
-	defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
+	defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) || \
+	defined(CONFIG_R8A7795)
 # if defined(CONFIG_SCIF_A)
 #  define SCIF_ORER	0x0200
 # else
-- 
2.8.0.rc3