[U-Boot] [PATCH 00/18] at91: Convert Ethernet and LCD to driver model

[Simon Glass]

This series is mainly designed to move the macb Ethernet to driver model,
along with the LCD controller. It also includes a few fixes:

- NAND with ECC doesn't build properly
- The instruction cache is off by default
- Ethernet macb doesn't send packets when the cache is enabled

A Snapper 9G45-based board is used for this work. It includes an AT91SAM9G45
CPU so is a good test of driver model on this chip.


Simon Glass (18):
  at91: Add support for the AT91 slow clock controller
  arm: Allow skipping of low-level init with I-cache on
  bootm: Align cache flush end address correctly
  net: Handle an empty bootp extension section
  net: macb: Prepare for driver-model conversion
  net: macb: Flush correct cache portion when sending
  net: macb: Convert to driver model
  arm: at91: dts: Bring in device tree file for AT91SAM9G45
  arm: at91: Add a header file for the real-time clock
  at91: Correct NAND ECC register access
  at91: nand: Set up the ECC strength correctly
  mtd: nand: Drop a blank line in nand_wait()
  at91: Add driver-model GPIO devices for AT91SAM9G45
  at91: mtd: nand: Add dev_warn() to correct build error in driver
  at91: video: Prepare for driver-model conversion
  at91: video: Support driver-model for the LCD driver
  fdt: Correct return value in fdtdec_decode_display_timing()
  arm: at91: Add support for gurnard

 README                                             |    5 +
 arch/arm/cpu/arm1136/start.S                       |    2 +
 arch/arm/cpu/arm920t/start.S                       |    3 +-
 arch/arm/cpu/arm926ejs/start.S                     |    2 +
 arch/arm/cpu/arm946es/start.S                      |    2 +
 arch/arm/cpu/armv7/start.S                         |    5 +-
 arch/arm/cpu/sa1100/start.S                        |    2 +
 arch/arm/dts/Makefile                              |    1 +
 arch/arm/dts/at91sam9g45-gurnard.dts               |  157 ++
 arch/arm/dts/at91sam9g45.dtsi                      | 1335 ++++++++++
 arch/arm/mach-at91/Kconfig                         |    9 +
 .../mach-at91/arm926ejs/at91sam9m10g45_devices.c   |   18 +
 arch/arm/mach-at91/include/mach/at91_rtc.h         |   71 +
 arch/arm/mach-at91/include/mach/at91_sck.h         |   21 +
 arch/arm/mach-at91/include/mach/at91sam9g45.h      |    1 +
 board/bluewater/gurnard/Kconfig                    |   12 +
 board/bluewater/gurnard/MAINTAINERS                |    6 +
 board/bluewater/gurnard/Makefile                   |   11 +
 board/bluewater/gurnard/gurnard.c                  |  449 ++++
 board/bluewater/gurnard/splash_logo.h              | 2619 ++++++++++++++++++++
 common/bootm.c                                     |    2 +-
 configs/gurnard_defconfig                          |   19 +
 drivers/mtd/nand/atmel_nand.c                      |    7 +-
 drivers/mtd/nand/nand_base.c                       |    1 -
 drivers/net/macb.c                                 |  320 ++-
 drivers/video/atmel_lcdfb.c                        |  197 +-
 include/atmel_lcd.h                                |    9 +
 include/configs/snapper9g45.h                      |  156 ++
 include/dt-bindings/clock/at91.h                   |   23 +
 include/dt-bindings/dma/at91.h                     |   52 +
 include/dt-bindings/pinctrl/at91.h                 |   40 +
 lib/fdtdec.c                                       |    2 +-
 net/bootp.c                                        |    9 +
 33 files changed, 5449 insertions(+), 119 deletions(-)
 create mode 100644 arch/arm/dts/at91sam9g45-gurnard.dts
 create mode 100644 arch/arm/dts/at91sam9g45.dtsi
 create mode 100644 arch/arm/mach-at91/include/mach/at91_rtc.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91_sck.h
 create mode 100644 board/bluewater/gurnard/Kconfig
 create mode 100644 board/bluewater/gurnard/MAINTAINERS
 create mode 100644 board/bluewater/gurnard/Makefile
 create mode 100644 board/bluewater/gurnard/gurnard.c
 create mode 100644 board/bluewater/gurnard/splash_logo.h
 create mode 100644 configs/gurnard_defconfig
 create mode 100644 include/configs/snapper9g45.h
 create mode 100644 include/dt-bindings/clock/at91.h
 create mode 100644 include/dt-bindings/dma/at91.h
 create mode 100644 include/dt-bindings/pinctrl/at91.h

-- 
2.8.0.rc3.226.g39d4020