[U-Boot] [PATCH V2 02/15] imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources

[Peng Fan]

i.MX6DL and i.MX6SOLO work the same, add i.MX6SOLO support
when enable/disable_ldb_di_clock_sources.

Signed-off-by: Peng Fan <van.freenix at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
---

V2:
 make this a single patch.

 arch/arm/cpu/armv7/mx6/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index e6f2275..a850d1a 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -1228,7 +1228,7 @@ static void disable_ldb_di_clock_sources(void)
 	/* Make sure PFDs are disabled at boot. */
 	reg = readl(&mxc_ccm->analog_pfd_528);
 	/* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
-	if (is_cpu_type(MXC_CPU_MX6DL))
+	if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
 		reg |= 0x80008080;
 	else
 		reg |= 0x80808080;
@@ -1251,7 +1251,7 @@ static void enable_ldb_di_clock_sources(void)
 	int reg;
 
 	reg = readl(&mxc_ccm->analog_pfd_528);
-	if (is_cpu_type(MXC_CPU_MX6DL))
+	if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
 		reg &= ~(0x80008080);
 	else
 		reg &= ~(0x80808080);
-- 
2.6.2