[U-Boot] [PATCH v2 2/2] imx: make ipu's di configurable

[Eric Nelson]

On 11/01/2016 07:04 AM, Max Krummenacher wrote:
> The ipu has two display interfaces. Make the used one a parameter
> in struct display_info_t instead of using unconditionally DI0.
> DI0 is the default setting.
> 
> Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
> 
> ---
> 
> Changes in v2:
> - none
> 
>  arch/arm/imx-common/video.c             | 2 +-
>  arch/arm/include/asm/imx-common/video.h | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
> index fdc987f..549bf9d 100644
> --- a/arch/arm/imx-common/video.c
> +++ b/arch/arm/imx-common/video.c
> @@ -34,7 +34,7 @@ int board_video_skip(void)
>  	}
>  
>  	if (i < display_count) {
> -		ret = ipuv3_fb_init(&displays[i].mode, 0,
> +		ret = ipuv3_fb_init(&displays[i].mode, displays[i].di ? 1 : 0,
>  				    displays[i].pixfmt);
>  		if (!ret) {
>  			if (displays[i].enable)
> diff --git a/arch/arm/include/asm/imx-common/video.h b/arch/arm/include/asm/imx-common/video.h
> index cad5f86..941a031 100644
> --- a/arch/arm/include/asm/imx-common/video.h
> +++ b/arch/arm/include/asm/imx-common/video.h
> @@ -12,6 +12,7 @@ struct display_info_t {
>  	int	bus;
>  	int	addr;
>  	int	pixfmt;
> +	int	di;
>  	int	(*detect)(struct display_info_t const *dev);
>  	void	(*enable)(struct display_info_t const *dev);
>  	struct	fb_videomode mode;
> 

Reviewed-by: Eric Nelson <eric at nelint.com>