[U-Boot] [RFC PATCH 07/10] sunxi: H3/A64: fix non-ODT setting

Andre Przywara andre.przywara at arm.com
Thu Nov 3 02:36:38 CET 2016


According to Jens disabling the on-die-termination should set bit 5,
not bit 1 in the respective register. Fix this.

Reported-by: Jens Kuske <jenskuske at gmail.com>
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/mach-sunxi/dram_sun8i_h3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/dram_sun8i_h3.c b/arch/arm/mach-sunxi/dram_sun8i_h3.c
index 2dc2071..3d569fc 100644
--- a/arch/arm/mach-sunxi/dram_sun8i_h3.c
+++ b/arch/arm/mach-sunxi/dram_sun8i_h3.c
@@ -385,7 +385,7 @@ static int mctl_channel_init(struct dram_para *para)
 		clrsetbits_le32(&mctl_ctl->dx[i].gcr, (0x3 << 4) |
 				(0x1 << 1) | (0x3 << 2) | (0x3 << 12) |
 				(0x3 << 14),
-				IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x2);
+				IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x20);
 
 	/* AC PDR should always ON */
 	setbits_le32(&mctl_ctl->aciocr, 0x1 << 1);
-- 
2.8.2



More information about the U-Boot mailing list