[U-Boot] [PATCH v3 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node

Vignesh R vigneshr at ti.com
Sat Nov 5 11:35:15 CET 2016


Update the spi-max-frequency property of m25p80 flash slave to match
that of TI QSPI controller node, so that QSPI operations happen at
maximum supported frequency of 76.8MHz.

Signed-off-by: Vignesh R <vigneshr at ti.com>
Reviewed-by: Jagan Teki <jteki at openedev.com>
---

v3: No changes.

 arch/arm/dts/dra7-evm.dts          | 2 +-
 arch/arm/dts/dra72-evm-common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts
index fe755c05841d..be36d456206d 100644
--- a/arch/arm/dts/dra7-evm.dts
+++ b/arch/arm/dts/dra7-evm.dts
@@ -505,7 +505,7 @@
 	spi-max-frequency = <76800000>;
 	m25p80 at 0 {
 		compatible = "s25fl256s1","spi-flash";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/dts/dra72-evm-common.dtsi b/arch/arm/dts/dra72-evm-common.dtsi
index b0993e5bf7e0..1e1ca725577f 100644
--- a/arch/arm/dts/dra72-evm-common.dtsi
+++ b/arch/arm/dts/dra72-evm-common.dtsi
@@ -441,7 +441,7 @@
 	spi-max-frequency = <76800000>;
 	m25p80 at 0 {
 		compatible = "s25fl256s1", "spi-flash";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
-- 
2.10.2



More information about the U-Boot mailing list