[U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM

[Jagan Teki]

Hi Stefano,

On Thu, Oct 20, 2016 at 11:29 AM, Jagan Teki <jagan at openedev.com> wrote:
> Hi Stefano,
>
> On Wed, Oct 19, 2016 at 4:53 PM, Jagan Teki <jteki at openedev.com> wrote:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> This series convert fec_mxc to DM and tested both dm and
>> non-dm code and it is on top of [1] with u-boot-imx/master
>> branch.
>>
>> Changes for v7:
>> - Remove fec_set_dev_name in dm probe
>>
>> Changes for v6:
>> - Add Acked-by tags in commit message
>>
>> Changes for v5:
>> - Add stub fec calls to minimize the #ifdef's
>> - Use same func names on eth_ops
>> - Remove reset_gpio in fec_mxc.h
>> - Add new patches, for cleanup driver
>>
>> Changes for v4:
>> - rebase to u-boot-imx/master
>>
>> Changes for v3:
>> - Add ARM: dts: imx6qdl-icore: Add FEC support
>> - icorem6: Use CONFIG_DM_ETH support
>>
>> Changes for v2:
>> - Add TODO for implementing the enet reset code
>>
>> [1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support
>>
>> Jagan Teki (5):
>>   net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr
>>   net: fec_mxc: Convert into driver model
>>   net: fec_mxc: Driver cleanups
>>   ARM: dts: imx6qdl-icore: Add FEC support
>>   icorem6: Use CONFIG_DM_ETH support
>>
>>  arch/arm/cpu/armv7/mx6/Kconfig       |   1 +
>>  arch/arm/dts/imx6qdl-icore.dtsi      |  24 ++
>>  board/engicam/icorem6/icorem6.c      |  71 -----
>>  configs/imx6qdl_icore_mmc_defconfig  |   1 -
>>  configs/imx6qdl_icore_nand_defconfig |   1 -
>>  drivers/net/fec_mxc.c                | 516 +++++++++++++++++++++++------------
>>  drivers/net/fec_mxc.h                |  31 +--
>>  7 files changed, 378 insertions(+), 267 deletions(-)
>
> Please apply this series along with [1]

Can you please apply.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.