[U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support

[Jagan Teki]

Hi Stefano,

On Fri, Oct 28, 2016 at 7:27 PM, Jagan Teki <jagan at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> This series support framebuffer and I2C on top of u-boot-imx.git with
> latest u-boot.git merge.
>
> Changes for v2:
> - Rebase on u-boot-imx.git and u-boot.git
>
> Jagan Teki (7):
>   video: Kconfig: Add VIDEO_IPV3 entry
>   imx6: icorem6: Add framebuffer support
>   imx6: icorem6: Add custom splashscreen support
>   i2c: Kconfig: Add SYS_I2C_MXC entry
>   i2c: mxc: Print hex instead of decimal for bus address
>   i2c: mxc: Make 'no gpio pinctrl state' print as debug
>   imx6: icorem6: Add I2C support
>
>  arch/arm/cpu/armv7/mx6/Kconfig       |   1 +
>  board/engicam/icorem6/icorem6.c      | 113 +++++++++++++++++++++++++++++++++++
>  configs/imx6qdl_icore_mmc_defconfig  |   5 +-
>  configs/imx6qdl_icore_nand_defconfig |   5 +-
>  drivers/i2c/Kconfig                  |   8 +++
>  drivers/i2c/mxc_i2c.c                |   2 +-
>  drivers/video/Kconfig                |   8 +++
>  include/configs/imx6qdl_icore.h      |  14 +++++
>  tools/logos/engicam.bmp              | Bin 0 -> 60214 bytes
>  9 files changed, 153 insertions(+), 3 deletions(-)
>  create mode 100755 tools/logos/engicam.bmp

Any comments?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.