[U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image

[york sun]

On 11/07/2016 09:44 PM, Yao Yuan wrote:
> On 11/08/2016 12:46 PM, York Sun wrote:
>> On 11/07/2016 07:52 PM, Yuan Yao wrote:
>>> From: Yuan Yao <yao.yuan at nxp.com>
>>>
>>> Signed-off-by: Yuan Yao <yao.yuan at nxp.com>
>>> ---
>>> Changed in v2:
>>> 	Move the readme for QSPI deploy out of only for ls2080aqds.
>>> ---
>>>  .../arm/cpu/armv8/fsl-layerscape/doc/README.deploy | 44
>>> ++++++++++++++++++++++
>>>  1 file changed, 44 insertions(+)
>>>  create mode 100644
>>> arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
>>>
>>> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
>>> b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
>>> new file mode 100644
>>> index 0000000..25813b3
>>> --- /dev/null
>>> +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
>>> @@ -0,0 +1,44 @@
>>> +Boot source support Overview
>>> +-------------------
>>> +	1. LS1043A
>>> +		LS1043AQDS:QSPI, SD, NOR, NAND
>>> +		LS1043ARDB:SD, NOR, NAND
>>> +	2. LS2080A
>>> +		LS2080AQDS:QSPI, SD, NOR, NAND
>>> +		LS2080ARDB:NOR, NAND
>>> +	3. LS1012A
>>> +		LS1012AQDS:QSPI
>>> +		LS1012ARDB:QSPI
>>> +	4. LS1046A
>>> +		LS1046AQDS:QSPI, SD, NOR, NAND
>>> +		LS1046ARDB:QSPI, SD
>>> +
>>
>> If you plan to add all SD/NAND/QSPI into this document, it is OK to call it
>> README.deploy. Otherwise it may be better to name as README.qspi.
>>
> I'm not be familiar with SD/NAND boot. So should I rename as README.qspi?
> Or just keep it but waiting for some others to add SD/NAND boot in another patch?
>

We already have NAND boot explained in other document. Stick with the 
procedure you are trying to explain. Keep it simple and we can expand it 
when necessary.
York