[U-Boot] [linux-sunxi] [PATCH 1/3] net: phy: realtek: Use the BIT() macro

[Priit Laes]

On Tue, 2016-11-08 at 17:38 +0100, Olliver Schinagl wrote:
> The BIT macro is the preferred method to set bits.
> This patch adds the bit macro and converts bit invocations.
> 
> Signed-off-by: Olliver Schinagl <oliver at schinagl.nl>
> ---
>  drivers/net/phy/realtek.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 7a99cb0..35b934b 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -9,13 +9,14 @@
>   */
>  #include <config.h>
>  #include <common.h>
> +#include <linux/bitops.h>
>  #include <phy.h>
>  
>  #define PHY_AUTONEGOTIATE_TIMEOUT 5000
>  
>  /* RTL8211x 1000BASE-T Control Register */
> -#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
> -#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
> +#define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
> +#define MIIM_RTL8211X_CTRL1000T_MASTER BIT(11);

You should also get rid of semicolons.


>  
>  /* RTL8211x PHY Status Register */
>  #define MIIM_RTL8211x_PHY_STATUS       0x11
> -- 
> 2.10.2
>