[U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init

[Simon Glass]

Hi Kever,

On 9 November 2016 at 00:30, Kever Yang <kever.yang at rock-chips.com> wrote:
> Enable the usb host port 5V power by enable the fix regulator.
> The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to
> the usb host port, we need to de-assert its reset pin at the same time.

This should go in a USB driver.

>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
>  board/chipspark/popmetal_rk3288/popmetal-rk3288.c | 31 +++++++++++++++++++++++
>  1 file changed, 31 insertions(+)

Regards,
Simon