[U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Jagan Teki
jagan at openedev.com
Wed Nov 16 13:39:28 CET 2016
On Wed, Nov 16, 2016 at 10:53 AM, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Hi,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jagan at openedev.com]
>> Sent: Wednesday, November 16, 2016 9:33 AM
>> To: u-boot at lists.denx.de
>> Cc: Jagan Teki <jagan at openedev.com>; Simon Glass <sjg at chromium.org>;
>> Bin Meng <bmeng.cn at gmail.com>; York Sun <york.sun at nxp.com>; Vignesh
>> R <vigneshr at ti.com>; Mugunthan V N <mugunthanvnm at ti.com>; Michal
>> Simek <michal.simek at xilinx.com>; Siva Durga Prasad Paladugu
>> <sivadur at xilinx.com>
>> Subject: [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
>>
>> INFO macro make flash table entries more adjustable like adding new
>> flash_info attributes, update ID length bytes and so on and more over it will
>> sync to Linux way of defining flash_info attributes.
>>
>> - Add JEDEC_ID
>> - Add JEDEC_EXT macro
>> - Add JEDEC_MFR
>> - spi_flash_params => spi_flash_info
>> - params => info
>>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Bin Meng <bmeng.cn at gmail.com>
>> Cc: York Sun <york.sun at nxp.com>
>> Cc: Vignesh R <vigneshr at ti.com>
>> Cc: Mugunthan V N <mugunthanvnm at ti.com>
>> Cc: Michal Simek <michal.simek at xilinx.com>
>> Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>> Tested-by: Jagan Teki <jagan at openedev.com>
>> Signed-off-by: Jagan Teki <jagan at openedev.com>
>> ---
>> drivers/mtd/spi/sandbox.c | 10 +-
>> drivers/mtd/spi/sf_internal.h | 26 +++--
>> drivers/mtd/spi/sf_params.c | 217 ++++++++++++++++++++++-------------------
>> -
>> drivers/mtd/spi/spi_flash.c | 136 +++++++++++++-------------
>> include/linux/err.h | 5 +
>> 5 files changed, 214 insertions(+), 180 deletions(-)
>>
>> diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c index
>> f59134f..d68ee4a 100644
>> --- a/drivers/mtd/spi/sandbox.c
>> +++ b/drivers/mtd/spi/sandbox.c
>> @@ -88,7 +88,7 @@ struct sandbox_spi_flash {
>> /* The current flash status (see STAT_XXX defines above) */
>> u16 status;
>> /* Data describing the flash we're emulating */
>> - const struct spi_flash_params *data;
>> + const struct spi_flash_info *data;
>> /* The file on disk to serv up data from */
>> int fd;
>> };
>> @@ -112,7 +112,7 @@ static int sandbox_sf_probe(struct udevice *dev)
>> struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
>> const char *file;
>> size_t len, idname_len;
>> - const struct spi_flash_params *data;
>> + const struct spi_flash_info *data;
>> struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
>> struct sandbox_state *state = state_get_current();
>> struct udevice *bus = dev->parent;
>> @@ -168,7 +168,7 @@ static int sandbox_sf_probe(struct udevice *dev)
>> }
>> debug("%s: device='%s'\n", __func__, spec);
>>
>> - for (data = spi_flash_params_table; data->name; data++) {
>> + for (data = spi_flash_ids; data->name; data++) {
>> len = strlen(data->name);
>> if (idname_len != len)
>> continue;
>> @@ -359,7 +359,9 @@ static int sandbox_sf_xfer(struct udevice *dev,
>> unsigned int bitlen,
>> debug(" id: off:%u tx:", sbsf->off);
>> if (sbsf->off < IDCODE_LEN) {
>> /* Extract correct byte from ID 0x00aabbcc */
>> - id = sbsf->data->jedec >>
>> + id = ((((sbsf->data)->id[0]) << 16) |
>> + (((sbsf->data)->id[1]) << 8 |
>> + ((sbsf->data)->id[2]))) >>
>> (8 * (IDCODE_LEN - 1 - sbsf->off));
> Please, no magic 16 and 8 here and everywhere
These are existing macro exapnsions will update on future if required.
>> } else {
>> id = 0;
>> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
>> index cde4cfb..a9455ac 100644
>> --- a/drivers/mtd/spi/sf_internal.h
>> +++ b/drivers/mtd/spi/sf_internal.h
>> @@ -103,24 +103,36 @@ int sst_write_bp(struct spi_flash *flash, u32 offset,
>> size_t len,
>> #define CMD_SPANSION_RDAR 0x65 /* Read any device register */
>> #define CMD_SPANSION_WRAR 0x71 /* Write any device register */
>> #endif
>> +
>> +#define JEDEC_MFR(info) ((info)->id[0])
>> +#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
>> +#define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
>> +
>> /**
>> - * struct spi_flash_params - SPI/QSPI flash device params structure
>> + * struct spi_flash_info - SPI/QSPI flash device params structure
>> *
>> * @name: Device name
>> ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
>> - * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
>> - * @ext_jedec: Device ext_jedec ID
>> * @sector_size: Isn't necessarily a sector size from vendor,
>> * the size listed here is what works with
>> CMD_ERASE_64K
>> * @nr_sectors: No.of sectors on this device
>> * @flags: Important param, for flash specific behaviour
>> */
>> -struct spi_flash_params {
>> +struct spi_flash_info {
>> const char *name;
>> - u32 jedec;
>> - u16 ext_jedec;
>> +
>> + /*
>> + * This array stores the ID bytes.
>> + * The first three bytes are the JEDIC ID.
>> + * JEDEC ID zero means "no ID" (mostly older chips).
>> + */
>> + u8 id[5];
>> + u8 id_len;
>> +
>> u32 sector_size;
>> u32 nr_sectors;
>>
>> + u16 page_size;
>> +
>> u16 flags;
>> #define SECT_4K BIT(0)
>> #define E_FSR BIT(1)
>> @@ -133,7 +145,7 @@ struct spi_flash_params {
>> #define RD_FULL (RD_QUAD | RD_DUAL | RD_QUADIO
>> | RD_DUALIO)
>> };
>>
>> -extern const struct spi_flash_params spi_flash_params_table[];
>> +extern const struct spi_flash_info spi_flash_ids[];
>>
>> /* Send a single-byte command to the device and read the response */ int
>> spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); diff -
>> -git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index
>> 5b50114..7fcc3bc 100644
>> --- a/drivers/mtd/spi/sf_params.c
>> +++ b/drivers/mtd/spi/sf_params.c
>> @@ -12,125 +12,140 @@
>>
>> #include "sf_internal.h"
>>
>> +/* Used when the "_ext_id" is two bytes at most */
>> +#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
>> + .id = { \
>> + ((_jedec_id) >> 16) & 0xff, \
>> + ((_jedec_id) >> 8) & 0xff, \
>> + (_jedec_id) & 0xff, \
>> + ((_ext_id) >> 8) & 0xff, \
>> + (_ext_id) & 0xff, \
>> + }, \
>> + .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
>> + .sector_size = (_sector_size), \
>> + .nr_sectors = (_n_sectors), \
>> + .page_size = 256, \
>> + .flags = (_flags),
>> +
> Is it just the default page size? Because, there are some Spansion parts with 512 bytes page size,
> I hope we are taking care of it in runtime and it is just the default one you are filling here, please confirm.
>
>> /* SPI/QSPI flash device params structure */ -const struct spi_flash_params
>> spi_flash_params_table[] = {
>> +const struct spi_flash_info spi_flash_ids[] = {
>> #ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
>> - {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4,
>> SECT_4K},
>> - {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8,
>> SECT_4K},
>> - {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8,
>> SECT_4K},
>> - {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16,
>> SECT_4K},
>> - {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32,
>> SECT_4K},
>> - {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64,
>> SECT_4K},
>> - {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128,
>> SECT_4K},
>> - {"AT25DF321A", 0x1f4701, 0x0, 64 * 1024, 64, SECT_4K},
>> - {"AT25DF321", 0x1f4700, 0x0, 64 * 1024, 64, SECT_4K},
>> - {"AT26DF081A", 0x1f4501, 0x0, 64 * 1024, 16, SECT_4K},
>> + {"AT45DB011D", INFO(0x1f2200, 0x0, 64 * 1024, 4,
>> SECT_4K) },
>> + {"AT45DB021D", INFO(0x1f2300, 0x0, 64 * 1024, 8,
>> SECT_4K) },
>> + {"AT45DB041D", INFO(0x1f2400, 0x0, 64 * 1024, 8,
>> SECT_4K) },
>> + {"AT45DB081D", INFO(0x1f2500, 0x0, 64 * 1024, 16,
>> SECT_4K) },
>> + {"AT45DB161D", INFO(0x1f2600, 0x0, 64 * 1024, 32,
>> SECT_4K) },
>> + {"AT45DB321D", INFO(0x1f2700, 0x0, 64 * 1024, 64,
>> SECT_4K) },
>> + {"AT45DB641D", INFO(0x1f2800, 0x0, 64 * 1024, 128,
>> SECT_4K) },
>> + {"AT25DF321A", INFO(0x1f4701, 0x0, 64 * 1024, 64, SECT_4K) },
>> + {"AT25DF321", INFO(0x1f4700, 0x0, 64 * 1024, 64, SECT_4K) },
>> + {"AT26DF081A", INFO(0x1f4501, 0x0, 64 * 1024, 16, SECT_4K) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_EON /* EON */
>> - {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0},
>> - {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K},
>> - {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0},
>> - {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0},
>> + {"EN25Q32B", INFO(0x1c3016, 0x0, 64 * 1024, 64, 0) },
>> + {"EN25Q64", INFO(0x1c3017, 0x0, 64 * 1024, 128, SECT_4K) },
>> + {"EN25Q128B", INFO(0x1c3018, 0x0, 64 * 1024, 256, 0) },
>> + {"EN25S64", INFO(0x1c3817, 0x0, 64 * 1024, 128, 0) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
>> - {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K},
>> - {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K},
>> + {"GD25Q64B", INFO(0xc84017, 0x0, 64 * 1024, 128, SECT_4K) },
>> + {"GD25LQ32", INFO(0xc86016, 0x0, 64 * 1024, 64, SECT_4K) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
>> - {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, 0},
>> - {"IS25LP064", 0x9d6017, 0x0, 64 * 1024, 128, 0},
>> - {"IS25LP128", 0x9d6018, 0x0, 64 * 1024, 256, 0},
>> + {"IS25LP032", INFO(0x9d6016, 0x0, 64 * 1024, 64, 0) },
>> + {"IS25LP064", INFO(0x9d6017, 0x0, 64 * 1024, 128, 0) },
>> + {"IS25LP128", INFO(0x9d6018, 0x0, 64 * 1024, 256, 0) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
>> - {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0},
>> - {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0},
>> - {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0},
>> - {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0},
>> - {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0},
>> - {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0},
>> - {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP},
>> - {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512,
>> RD_FULL | WR_QPP},
>> - {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024,
>> RD_FULL | WR_QPP},
>> - {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP},
>> + {"MX25L2006E", INFO(0xc22012, 0x0, 64 * 1024, 4, 0) },
>> + {"MX25L4005", INFO(0xc22013, 0x0, 64 * 1024, 8, 0) },
>> + {"MX25L8005", INFO(0xc22014, 0x0, 64 * 1024, 16, 0) },
>> + {"MX25L1605D", INFO(0xc22015, 0x0, 64 * 1024, 32, 0) },
>> + {"MX25L3205D", INFO(0xc22016, 0x0, 64 * 1024, 64, 0) },
>> + {"MX25L6405D", INFO(0xc22017, 0x0, 64 * 1024, 128, 0) },
>> + {"MX25L12805", INFO(0xc22018, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> + {"MX25L25635F", INFO(0xc22019, 0x0, 64 * 1024, 512,
>> RD_FULL | WR_QPP) },
>> + {"MX25L51235F", INFO(0xc2201a, 0x0, 64 * 1024, 1024,
>> RD_FULL | WR_QPP) },
>> + {"MX25L12855E", INFO(0xc22618, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
>> - {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0},
>> - {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0},
>> - {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0},
>> - {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0},
>> - {"S25FL116K", 0x014015, 0x0, 64 * 1024, 128, 0},
>> - {"S25FL164K", 0x014017, 0x0140, 64 * 1024, 128, 0},
>> - {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL |
>> WR_QPP},
>> - {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL |
>> WR_QPP},
>> - {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL |
>> WR_QPP},
>> - {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL |
>> WR_QPP},
>> - {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64, RD_FULL |
>> WR_QPP},
>> - {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL |
>> WR_QPP},
>> - {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL |
>> WR_QPP},
>> - {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL |
>> WR_QPP},
>> - {"S25FS512S", 0x010220, 0x4D00, 128 * 1024, 512, RD_FULL |
>> WR_QPP},
>> - {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL |
>> WR_QPP},
>> - {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL |
>> WR_QPP},
>> - {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL |
>> WR_QPP},
>> + {"S25FL008A", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
>> + {"S25FL016A", INFO(0x010214, 0x0, 64 * 1024, 32, 0) },
>> + {"S25FL032A", INFO(0x010215, 0x0, 64 * 1024, 64, 0) },
>> + {"S25FL064A", INFO(0x010216, 0x0, 64 * 1024, 128, 0) },
>> + {"S25FL116K", INFO(0x014015, 0x0, 64 * 1024, 128, 0) },
>> + {"S25FL164K", INFO(0x014017, 0x0140, 64 * 1024, 128, 0) },
>> + {"S25FL128P_256K", INFO(0x012018, 0x0300, 256 * 1024, 64,
>> RD_FULL | WR_QPP) },
>> + {"S25FL128P_64K", INFO(0x012018, 0x0301, 64 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> + {"S25FL032P", INFO(0x010215, 0x4d00, 64 * 1024, 64, RD_FULL |
>> WR_QPP) },
>> + {"S25FL064P", INFO(0x010216, 0x4d00, 64 * 1024, 128, RD_FULL
>> | WR_QPP) },
>> + {"S25FL128S_256K", INFO(0x012018, 0x4d00, 256 * 1024, 64,
>> RD_FULL | WR_QPP) },
>> + {"S25FL128S_64K", INFO(0x012018, 0x4d01, 64 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> + {"S25FL256S_256K", INFO(0x010219, 0x4d00, 256 * 1024, 128,
>> RD_FULL | WR_QPP) },
>> + {"S25FL256S_64K", INFO(0x010219, 0x4d01, 64 * 1024, 512,
>> RD_FULL | WR_QPP) },
>> + {"S25FS512S", INFO(0x010220, 0x4D00, 128 * 1024, 512, RD_FULL
>> | WR_QPP) },
>> + {"S25FL512S_256K", INFO(0x010220, 0x4d00, 256 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> + {"S25FL512S_64K", INFO(0x010220, 0x4d01, 64 * 1024, 1024,
>> RD_FULL | WR_QPP) },
>> + {"S25FL512S_512K", INFO(0x010220, 0x4f00, 256 * 1024, 256,
>> RD_FULL | WR_QPP) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
>> - {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0},
>> - {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0},
>> - {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0},
>> - {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0},
>> - {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0},
>> - {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0},
>> - {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_QUAD |
>> RD_DUAL},
>> - {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0},
>> - {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0},
>> - {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0},
>> - {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, SECT_4K},
>> - {"N25Q016A", 0x20bb15, 0x0, 64 * 1024, 32, SECT_4K},
>> - {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP},
>> - {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP},
>> - {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K},
>> - {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K},
>> - {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K},
>> - {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K},
>> + {"M25P10", INFO(0x202011, 0x0, 32 * 1024, 4, 0) },
>> + {"M25P20", INFO(0x202012, 0x0, 64 * 1024, 4, 0) },
>> + {"M25P40", INFO(0x202013, 0x0, 64 * 1024, 8, 0) },
>> + {"M25P80", INFO(0x202014, 0x0, 64 * 1024, 16, 0) },
>> + {"M25P16", INFO(0x202015, 0x0, 64 * 1024, 32, 0) },
>> + {"M25PE16", INFO(0x208015, 0x1000, 64 * 1024, 32, 0) },
>> + {"M25PX16", INFO(0x207115, 0x1000, 64 * 1024, 32, RD_QUAD |
>> RD_DUAL) },
>> + {"M25P32", INFO(0x202016, 0x0, 64 * 1024, 64, 0) },
>> + {"M25P64", INFO(0x202017, 0x0, 64 * 1024, 128, 0) },
>> + {"M25P128", INFO(0x202018, 0x0, 256 * 1024, 64, 0) },
>> + {"M25PX64", INFO(0x207117, 0x0, 64 * 1024, 128, SECT_4K) },
>> + {"N25Q016A", INFO(0x20bb15, 0x0, 64 * 1024, 32, SECT_4K) },
>> + {"N25Q32", INFO(0x20ba16, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q32A", INFO(0x20bb16, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q64", INFO(0x20ba17, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q64A", INFO(0x20bb17, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q128", INFO(0x20ba18, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP) },
>> + {"N25Q128A", INFO(0x20bb18, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP) },
>> + {"N25Q256", INFO(0x20ba19, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q256A", INFO(0x20bb19, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"N25Q512", INFO(0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K) },
>> + {"N25Q512A", INFO(0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K) },
>> + {"N25Q1024", INFO(0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K) },
>> + {"N25Q1024A", INFO(0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL |
>> WR_QPP | E_FSR | SECT_4K) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_SST /* SST */
>> - {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8,
>> SECT_4K | SST_WR},
>> - {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16,
>> SECT_4K | SST_WR},
>> - {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32,
>> SECT_4K | SST_WR},
>> - {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64,
>> SECT_4K | SST_WR},
>> - {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128,
>> SECT_4K},
>> - {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1,
>> SECT_4K | SST_WR},
>> - {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2,
>> SECT_4K | SST_WR},
>> - {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4,
>> SECT_4K | SST_WR},
>> - {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8,
>> SECT_4K | SST_WR},
>> - {"SST25WF040B", 0x621613, 0x0, 64 * 1024, 8,
>> SECT_4K},
>> - {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16,
>> SECT_4K | SST_WR},
>> + {"SST25VF040B", INFO(0xbf258d, 0x0, 64 * 1024, 8,
>> SECT_4K | SST_WR) },
>> + {"SST25VF080B", INFO(0xbf258e, 0x0, 64 * 1024, 16,
>> SECT_4K | SST_WR) },
>> + {"SST25VF016B", INFO(0xbf2541, 0x0, 64 * 1024, 32,
>> SECT_4K | SST_WR) },
>> + {"SST25VF032B", INFO(0xbf254a, 0x0, 64 * 1024, 64,
>> SECT_4K | SST_WR) },
>> + {"SST25VF064C", INFO(0xbf254b, 0x0, 64 * 1024, 128,
>> SECT_4K) },
>> + {"SST25WF512", INFO(0xbf2501, 0x0, 64 * 1024, 1,
>> SECT_4K | SST_WR) },
>> + {"SST25WF010", INFO(0xbf2502, 0x0, 64 * 1024, 2,
>> SECT_4K | SST_WR) },
>> + {"SST25WF020", INFO(0xbf2503, 0x0, 64 * 1024, 4,
>> SECT_4K | SST_WR) },
>> + {"SST25WF040", INFO(0xbf2504, 0x0, 64 * 1024, 8,
>> SECT_4K | SST_WR) },
>> + {"SST25WF040B", INFO(0x621613, 0x0, 64 * 1024, 8,
>> SECT_4K) },
>> + {"SST25WF080", INFO(0xbf2505, 0x0, 64 * 1024, 16,
>> SECT_4K | SST_WR) },
>> #endif
>> #ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
>> - {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0},
>> - {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0},
>> - {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0},
>> - {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, SECT_4K},
>> - {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, SECT_4K},
>> - {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, SECT_4K},
>> - {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, SECT_4K},
>> - {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K},
>> - {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP | SECT_4K},
>> + {"W25P80", INFO(0xef2014, 0x0, 64 * 1024, 16, 0) },
>> + {"W25P16", INFO(0xef2015, 0x0, 64 * 1024, 32, 0) },
>> + {"W25P32", INFO(0xef2016, 0x0, 64 * 1024, 64, 0) },
>> + {"W25X40", INFO(0xef3013, 0x0, 64 * 1024, 8, SECT_4K) },
>> + {"W25X16", INFO(0xef3015, 0x0, 64 * 1024, 32, SECT_4K) },
>> + {"W25X32", INFO(0xef3016, 0x0, 64 * 1024, 64, SECT_4K) },
>> + {"W25X64", INFO(0xef3017, 0x0, 64 * 1024, 128, SECT_4K) },
>> + {"W25Q80BL", INFO(0xef4014, 0x0, 64 * 1024, 16, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q16CL", INFO(0xef4015, 0x0, 64 * 1024, 32, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q32BV", INFO(0xef4016, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q64CV", INFO(0xef4017, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q128BV", INFO(0xef4018, 0x0, 64 * 1024, 256, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q256", INFO(0xef4019, 0x0, 64 * 1024, 512, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q80BW", INFO(0xef5014, 0x0, 64 * 1024, 16, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q16DW", INFO(0xef6015, 0x0, 64 * 1024, 32, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q32DW", INFO(0xef6016, 0x0, 64 * 1024, 64, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q64DW", INFO(0xef6017, 0x0, 64 * 1024, 128, RD_FULL |
>> WR_QPP | SECT_4K) },
>> + {"W25Q128FW", INFO(0xef6018, 0x0, 64 * 1024, 256,
>> RD_FULL | WR_QPP | SECT_4K) },
>> #endif
>> {}, /* Empty entry to terminate the list */
>> /*
>> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index
>> 7f6e9ae..95ee5ac 100644
>> --- a/drivers/mtd/spi/spi_flash.c
>> +++ b/drivers/mtd/spi/spi_flash.c
>> @@ -165,7 +165,8 @@ bar_end:
>> return flash->bank_curr;
>> }
>>
>> -static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
>> +static int spi_flash_read_bar(struct spi_flash *flash,
>> + const struct spi_flash_info *info)
>> {
>> u8 curr_bank = 0;
>> int ret;
>> @@ -173,7 +174,7 @@ static int spi_flash_read_bar(struct spi_flash *flash,
>> u8 idcode0)
>> if (flash->size <= SPI_FLASH_16MB_BOUN)
>> goto bar_end;
>>
>> - switch (idcode0) {
>> + switch (JEDEC_MFR(info)) {
>> case SPI_FLASH_CFI_MFR_SPANSION:
>> flash->bank_read_cmd = CMD_BANKADDR_BRRD;
>> flash->bank_write_cmd = CMD_BANKADDR_BRWR; @@ -
>> 924,9 +925,35 @@ static int micron_quad_enable(struct spi_flash *flash) }
>> #endif
>>
>> -static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
>> +static const struct spi_flash_info *spi_flash_read_id(struct spi_flash
>> +*flash)
>> {
>> - switch (idcode0) {
>> + int tmp;
>> + u8 id[5];
>> + const struct spi_flash_info *info;
>> +
>> + tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id, 5);
>> + if (tmp < 0) {
>> + printf("SF: error %d reading JEDEC ID\n", tmp);
>> + return ERR_PTR(tmp);
>> + }
>> +
>> + info = spi_flash_ids;
>> + for (; info->name != NULL; info++) {
>> + if (info->id_len) {
>> + if (!memcmp(info->id, id, info->id_len))
>> + return info;
>> + }
>> + }
>> +
>> + printf("SF: unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
>> + id[0], id[1], id[2]);
>> + return ERR_PTR(-ENODEV);
>> +}
>> +
>> +static int set_quad_mode(struct spi_flash *flash,
>> + const struct spi_flash_info *info)
>> +{
>> + switch (JEDEC_MFR(info)) {
>> #ifdef CONFIG_SPI_FLASH_MACRONIX
>> case SPI_FLASH_CFI_MFR_MACRONIX:
>> return macronix_quad_enable(flash);
>> @@ -941,7 +968,8 @@ static int set_quad_mode(struct spi_flash *flash, u8
>> idcode0)
>> return micron_quad_enable(flash);
>> #endif
>> default:
>> - printf("SF: Need set QEB func for %02x flash\n", idcode0);
>> + printf("SF: Need set QEB func for %02x flash\n",
>> + JEDEC_MFR(info));
>> return -1;
>> }
>> }
>> @@ -1011,45 +1039,12 @@ static int
>> spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) int
>> spi_flash_scan(struct spi_flash *flash) {
>> struct spi_slave *spi = flash->spi;
>> - const struct spi_flash_params *params;
>> - u16 jedec, ext_jedec;
>> - u8 idcode[5];
>> - int ret;
>> -
>> - /* Read the ID codes */
>> - ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
>> - if (ret) {
>> - printf("SF: Failed to get idcodes\n");
>> - return ret;
>> - }
>> -
>> -#ifdef DEBUG
>> - printf("SF: Got idcodes\n");
>> - print_buffer(0, idcode, 1, sizeof(idcode), 0);
>> -#endif
>> -
>> - jedec = idcode[1] << 8 | idcode[2];
>> - ext_jedec = idcode[3] << 8 | idcode[4];
>> -
>> - /* Validate params from spi_flash_params table */
>> - params = spi_flash_params_table;
>> - for (; params->name != NULL; params++) {
>> - if ((params->jedec >> 16) == idcode[0]) {
>> - if ((params->jedec & 0xFFFF) == jedec) {
>> - if (params->ext_jedec == 0)
>> - break;
>> - else if (params->ext_jedec == ext_jedec)
>> - break;
>> - }
>> - }
>> - }
>> + const struct spi_flash_info *info = NULL;
>> + int ret = -1;
>>
>> - if (!params->name) {
>> - printf("SF: Unsupported flash IDs: ");
>> - printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
>> - idcode[0], jedec, ext_jedec);
>> - return -EPROTONOSUPPORT;
>> - }
>> + info = spi_flash_read_id(flash);
>> + if (IS_ERR_OR_NULL(info))
>> + return -ENOENT;
>>
>> #ifdef CONFIG_SPI_FLASH_SPANSION
>> /*
>> @@ -1065,11 +1060,17 @@ int spi_flash_scan(struct spi_flash *flash)
>> * sector that is not overlaid by the parameter sectors.
>> * The uniform sector erase command has no effect on parameter
>> sectors.
>> */
>> - if ((jedec == 0x0219 || (jedec == 0x0220)) &&
>> - (ext_jedec & 0xff00) == 0x4d00) {
>> + if ((JEDEC_ID(info) == 0x0219 || (JEDEC_ID(info) == 0x0220)) &&
>> + (JEDEC_EXT(info) & 0xff00) == 0x4d00) {
>> int ret;
>> + u8 idcode[5];
>> u8 id[6];
>>
>> + /* Read the ID codes again, 5 bytes */
>> + ret = spi_flash_cmd(flash->spi, CMD_READ_ID, idcode,
>> sizeof(idcode));
>> + if (ret)
>> + return -EIO;
>> +
> why are we reading id again, cant it be available as part of info?
Yes, but I can say this is removable code getting idcodes from info
it's again a separate code task so, for the proper bisectable I am
reading the idcode based on the existing code logic. of-course this is
removing in later patch.
>
>> /* Read the ID codes again, 6 bytes */
>> ret = spi_flash_cmd(flash->spi, CMD_READ_ID, id, sizeof(id));
>> if (ret)
>> @@ -1088,18 +1089,18 @@ int spi_flash_scan(struct spi_flash *flash)
>> }
>> #endif
>> /* Flash powers up read-only, so clear BP# bits */
>> - if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
>> - idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
>> - idcode[0] == SPI_FLASH_CFI_MFR_SST)
>> + if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
>> + JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX ||
>> + JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST)
>> write_sr(flash, 0);
>>
>> /* Assign spi data */
>> - flash->name = params->name;
>> + flash->name = info->name;
>> flash->memory_map = spi->memory_map;
>> flash->dual_flash = spi->option;
>>
>> /* Assign spi flash flags */
>> - if (params->flags & SST_WR)
>> + if (info->flags & SST_WR)
>> flash->flags |= SNOR_F_SST_WR;
>>
>> /* Assign spi_flash ops */
>> @@ -1118,7 +1119,7 @@ int spi_flash_scan(struct spi_flash *flash) #endif
>>
>> /* lock hooks are flash specific - assign them based on idcode0 */
>> - switch (idcode[0]) {
>> + switch (JEDEC_MFR(info)) {
>> #if defined(CONFIG_SPI_FLASH_STMICRO) ||
>> defined(CONFIG_SPI_FLASH_SST)
>> case SPI_FLASH_CFI_MFR_STMICRO:
>> case SPI_FLASH_CFI_MFR_SST:
>> @@ -1128,28 +1129,26 @@ int spi_flash_scan(struct spi_flash *flash) #endif
>> break;
>> default:
>> - debug("SF: Lock ops not supported for %02x flash\n",
>> idcode[0]);
>> + debug("SF: Lock ops not supported for %02x flash\n",
>> +JEDEC_MFR(info));
>> }
>>
>> /* Compute the flash size */
>> flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
>> + flash->page_size = info->page_size;
>> /*
>> * The Spansion S25FL032P and S25FL064P have 256b pages, yet use
>> the
>> * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes
>> with
>> * the 0x4d00 Extended JEDEC code have 512b pages. All of the
>> others
>> * have 256b pages.
>> */
>> - if (ext_jedec == 0x4d00) {
>> - if ((jedec == 0x0215) || (jedec == 0x216) || (jedec == 0x220))
>> - flash->page_size = 256;
>> - else
>> + if (JEDEC_EXT(info) == 0x4d00) {
>> + if ((JEDEC_ID(info) != 0x0215) &&
>> + (JEDEC_ID(info) != 0x0216))
>> flash->page_size = 512;
>> - } else {
>> - flash->page_size = 256;
>> }
>> flash->page_size <<= flash->shift;
>> - flash->sector_size = params->sector_size << flash->shift;
>> - flash->size = flash->sector_size * params->nr_sectors << flash->shift;
>> + flash->sector_size = info->sector_size << flash->shift;
>> + flash->size = flash->sector_size * info->nr_sectors << flash->shift;
>
> This is incorrect, Dont do flash->shift again, as you already did above for sector size calculation.
> Doing this for second time causes double the actual size.
How come? This is an the existing code with params replaced by info.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list