[U-Boot] [PATCH] imx: iomux-v3: provide MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC

[Stefano Babic]

Hi Sebastian,

On 16/11/2016 21:02, Sebastian Andrzej Siewior wrote:
> MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK is in its currently RGMII_RXC.
> Fix this by providing RX_CLK with properly setting the DAISY value and
> MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC which did the "previous" setting.
> There should be no fallout because there no in tree users of
> MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK.
> 

Right - I do not see any use case, and we do not break any board.

> Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
> ---
>  arch/arm/dts/imx7d-pinfunc.h              | 3 ++-
>  arch/arm/include/asm/arch-mx7/mx7d_pins.h | 3 ++-
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/dts/imx7d-pinfunc.h b/arch/arm/dts/imx7d-pinfunc.h
> index 32d2464b417d..7bc1dee0f7ff 100644
> --- a/arch/arm/dts/imx7d-pinfunc.h
> +++ b/arch/arm/dts/imx7d-pinfunc.h
> @@ -1123,7 +1123,8 @@
>  #define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
>  #define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
>  #define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
> -#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
> +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC                    0x0260 0x04D0 0x056C 0x0 0x0
> +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x1
>  #define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
>  #define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
>  #define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
> diff --git a/arch/arm/include/asm/arch-mx7/mx7d_pins.h b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> index 0ab1246de852..55375f5aa0dc 100644
> --- a/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> +++ b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> @@ -1278,7 +1278,8 @@ enum {
>  	MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                      = IOMUX_PAD(0x04CC, 0x025C, 6, 0x04E4, 2, 0),
>  	MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                    = IOMUX_PAD(0x04CC, 0x025C, 7, 0x0000, 0, 0),
>  
> -	MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      = IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 0, 0),
> +	MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC                   = IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 0, 0),
> +	MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      = IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 1, 0),
>  	MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                      = IOMUX_PAD(0x04D0, 0x0260, 1, 0x0000, 0, 0),
>  	MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                      = IOMUX_PAD(0x04D0, 0x0260, 2, 0x06A8, 1, 0),
>  	MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                          = IOMUX_PAD(0x04D0, 0x0260, 3, 0x0000, 0, 0),
> 

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================