[U-Boot] [PATCH] timer: Support clocks via phandle

[Vlad Zakharov]

Earlier timer driver needed a clock-frequency property in compatible
device-tree nodes. Another way is to reference a clock via a phandle.

So now timer_pre_probe tries to get clock by reference through device
tree. In case it is impossible to get clock device through the
reference, clock-frequency property of the timer node is read to provide
backward compatibility.

Signed-off-by: Vlad Zakharov <vzakhar at synopsys.com>
---
 drivers/timer/timer-uclass.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c
index f8ddf93..cca41f1 100644
--- a/drivers/timer/timer-uclass.c
+++ b/drivers/timer/timer-uclass.c
@@ -8,6 +8,7 @@
 #include <dm.h>
 #include <dm/lists.h>
 #include <dm/device-internal.h>
+#include <clk.h>
 #include <errno.h>
 #include <timer.h>
 
@@ -42,9 +43,17 @@ unsigned long notrace timer_get_rate(struct udevice *dev)
 static int timer_pre_probe(struct udevice *dev)
 {
 	struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
-
-	uc_priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-					     "clock-frequency", 0);
+	struct clk *timer_clk;
+	int err;
+
+	err = clk_get_by_index(dev, 0, timer_clk);
+	if (!err) {
+		uc_priv->clock_rate = clk_get_rate(timer_clk);
+		if (uc_priv->clock_rate < 0)
+			return uc_priv->clock_rate;
+	} else
+		uc_priv->clock_rate = fdtdec_get_int(gd->fdt_blob,
+				dev->of_offset,	"clock-frequency", 0);
 
 	return 0;
 }
-- 
2.7.4