[U-Boot] [PATCH 0/7] SF: Cadence QSPI driver fixes and clean up

[Jagan Teki]

On Fri, Nov 25, 2016 at 6:02 PM, Phil Edworthy
<phil.edworthy at renesas.com> wrote:
> Hi Jagan,
>
> On 02 November 2016 15:16, Phil wrote:
>> This series has fixes, patches to clean the code up, and add support for
>> specifying the sampling edge.
>>
>> Phil Edworthy (7):
>>   spi: cadence_qspi: Fix clearing of pol/pha bits
>>   spi: cadence_qspi: Fix baud rate calculation
>>   spi: cadence_qspi: Use #define for bits instead of bit shifts
>>   spi: cadence_qspi: Clean up the #define names
>>   spi: cadence_qspi: Remove returns from end of void functions
>>   spi: cadence_qspi: Fix CQSPI_CAL_DELAY calculation
>>   spi: cadence_qspi: Support specifying the sample edge used
>>
>>  doc/device-tree-bindings/spi/spi-cadence.txt |   2 +
>>  drivers/spi/cadence_qspi.c                   |  10 +-
>>  drivers/spi/cadence_qspi.h                   |   3 +-
>>  drivers/spi/cadence_qspi_apb.c               | 164 +++++++++++++--------------
>>  4 files changed, 88 insertions(+), 91 deletions(-)
>
> I've sent a couple of new versions of some of these patches based on feedback
> and something I noticed, but most have not had any comments.
> Would you like me to send the whole series again with the latest versions?

Yes, please do that.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.