[U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data

[Simon Glass]

Hi Marex,

On 25 November 2016 at 15:32, Marek Vasut <marex at denx.de> wrote:
> Add driver data to each compatible string to identify the type of
> the port. Since all the ports in the driver are entirely compatible
> with 16550 for now, all are marked with PORT_NS16550. But, there
> are ports which have specific quirks, like the JZ4780 UART, which
> do not have any DT property to denote the quirks. Instead, Linux
> uses the compatible string to discern such ports and enable the
> necessary quirks.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: Simon Glass <sjg at chromium.org>
> ---
>  drivers/serial/ns16550.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 3c9f3b0..3130a1d 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -360,6 +360,12 @@ int ns16550_serial_probe(struct udevice *dev)
>         return 0;
>  }
>
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +enum {
> +       PORT_NS16550 = 0,
> +};
> +#endif
> +
>  #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
>  int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
>  {
> @@ -453,16 +459,16 @@ const struct dm_serial_ops ns16550_serial_ops = {
>   * compatible string to your dts.
>   */
>  static const struct udevice_id ns16550_serial_ids[] = {
> -       { .compatible = "ns16550" },
> -       { .compatible = "ns16550a" },
> -       { .compatible = "nvidia,tegra20-uart" },
> -       { .compatible = "snps,dw-apb-uart" },
> -       { .compatible = "ti,omap2-uart" },
> -       { .compatible = "ti,omap3-uart" },
> -       { .compatible = "ti,omap4-uart" },
> -       { .compatible = "ti,am3352-uart" },
> -       { .compatible = "ti,am4372-uart" },
> -       { .compatible = "ti,dra742-uart" },
> +       { .compatible = "ns16550",              .data = PORT_NS16550 },
> +       { .compatible = "ns16550a",             .data = PORT_NS16550 },
> +       { .compatible = "nvidia,tegra20-uart",  .data = PORT_NS16550 },
> +       { .compatible = "snps,dw-apb-uart",     .data = PORT_NS16550 },
> +       { .compatible = "ti,omap2-uart",        .data = PORT_NS16550 },
> +       { .compatible = "ti,omap3-uart",        .data = PORT_NS16550 },
> +       { .compatible = "ti,omap4-uart",        .data = PORT_NS16550 },
> +       { .compatible = "ti,am3352-uart",       .data = PORT_NS16550 },
> +       { .compatible = "ti,am4372-uart",       .data = PORT_NS16550 },
> +       { .compatible = "ti,dra742-uart",       .data = PORT_NS16550 },

But can we have 0 as the default so we don't need these values?

Regards,
Simon