[U-Boot] [PATCH 0/6] davinci: omapl138_lcdk: add SPL NAND boot support

[Tom Rini]

On Tue, Nov 29, 2016 at 02:31:28PM +0100, Fabien Parent wrote:

> The default AIS image generated contains the SPL, but the latter is not able to
> load u-boot because the NAND configuration is missing. This series adds SPL NAND
> boot support and results in the AIS image that is generated able to boot from
> NAND.
> 
> Fabien Parent (6):
>   NAND: davinci: add support for NAND chips with 16 bits bus
>   davinci: omapl138_lcdk: use correct define for 16 bit NAND chips
>   davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE
>   davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE
>   davinci: omapl138_lck: remove obsolete define
>   davinci: omapl138_lcdk: add NAND SPL boot support
> 
>  board/davinci/da8xxevm/README.omapl138-lcdk | 28 ------------------------
>  configs/omapl138_lcdk_defconfig             |  3 +++
>  drivers/mtd/nand/davinci_nand.c             |  3 +++
>  include/configs/omapl138_lcdk.h             | 34 +++++++++++++++++++++++++----
>  scripts/config_whitelist.txt                |  3 ---
>  5 files changed, 36 insertions(+), 35 deletions(-)
>  delete mode 100644 board/davinci/da8xxevm/README.omapl138-lcdk

Everything looks good, so I've reviewed-by'd it.  But it also shows a
number of things which should be converted to Kconfig (I stumbled onto
in looking at why you didn't set SYS_NAND_BUSWIDTH_16BIT via defconfig).
Do you have time to move the davinci NAND driver to Kconfig while in
here?  Thanks!

> 
> -- 
> 2.10.2
> 

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/f92fef40/attachment.sig>