[U-Boot] [PATCH v6] mx6sx: Add initial support for Samtec VIN|ING 2000 board

[Stefano Babic]

On 29/11/2016 16:13, Christoph Fritz wrote:
> This patch adds initial support for Samtec VIN|ING 2000 board.
> 
> Signed-off-by: Christoph Fritz <chf.fritz at googlemail.com>
> ---
> Changes since v1:
>  - add more comments (enet phy init)
>  - fix layout style e.g. multi-line-comments
>  - use pinmux macros
>  - use helper funcs clrsetbits_le32() and wait_for_bit()
>  - make some functions static
>  - drop board_ehci_hcd_init() and board_phy_config()
>  - simplify environment
> Changes since v2:
>  - adapt error handling in board_eth_init() and read_adc()
>  - purge unused macros
>  - use config_distro_bootcmd as environment
>  - fix CONFIG_PWM_IMX undef handling
> Changes since v3:
>  - fix comment spelling
>  - use u32
>  - rearrange if condition
> Changes since v4:
>  - use parent error codes
>  - rename config string to TARGET_SAMTEC_VINING_2000
> Changes since v5:
>  - simplify board_eth_init() error message
> 
>  arch/arm/cpu/armv7/mx6/Kconfig         |   7 +
>  board/samtec/vining_2000/Kconfig       |  12 +
>  board/samtec/vining_2000/MAINTAINERS   |   6 +
>  board/samtec/vining_2000/Makefile      |   6 +
>  board/samtec/vining_2000/imximage.cfg  | 132 +++++++++
>  board/samtec/vining_2000/vining_2000.c | 517 +++++++++++++++++++++++++++++++++
>  configs/vining_2000_defconfig          |  31 ++
>  include/configs/vining_2000.h          | 123 ++++++++
>  8 files changed, 834 insertions(+)
>  create mode 100644 board/samtec/vining_2000/Kconfig
>  create mode 100644 board/samtec/vining_2000/MAINTAINERS
>  create mode 100644 board/samtec/vining_2000/Makefile
>  create mode 100644 board/samtec/vining_2000/imximage.cfg
>  create mode 100644 board/samtec/vining_2000/vining_2000.c
>  create mode 100644 configs/vining_2000_defconfig
>  create mode 100644 include/configs/vining_2000.h
> 
> diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
> index 762a581..057b8cd 100644

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================