[U-Boot] [PATCH v2 5/6] colibri_vf: use same NAND clock as Linux uses

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Currently a divider of 6 has been used, leading to following NAND
Flash Controller (NFC) clocks:
VF61: 27.7 MHz (166.7MHz bus clock)
VF50: 22 MHz (132MHz bus clock)

The NAND Flash Memory used on VF50 allows to use clock speed of
up to 33MHz, while the Flash Memory of VF61 allows 50MHz. We can
use the same divider of 4 on both modules to configure the maximal
possible clock speeds:
VF61: 41.7 MHz
VF50: 33 MHz

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v2: None

 board/toradex/colibri_vf/colibri_vf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 15f263c..7b74eb7 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -428,7 +428,7 @@ static void clock_init(void)
 			CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
 			CCM_CSCDR2_NFC_EN);
 	clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
-			CCM_CSCDR3_NFC_PRE_DIV(5));
+			CCM_CSCDR3_NFC_PRE_DIV(3));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 			CCM_CSCMR2_RMII_CLK_SEL(2));
 }
-- 
2.10.2