[U-Boot] [PATCH 10/16] README: i2c: Drop unused i2c CONFIG options

[Simon Glass]

CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_MULTI_NOPROBES are not used
in U-Boot, so drop them.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 README | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/README b/README
index 0c90415..614a81c 100644
--- a/README
+++ b/README
@@ -2326,10 +2326,7 @@ CBFS (Coreboot Filesystem) support
 		additional defines:
 
 		CONFIG_SYS_NUM_I2C_BUSES
-		Hold the number of i2c buses you want to use. If you
-		don't use/have i2c muxes on your i2c bus, this
-		is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
-		omit this define.
+		Hold the number of i2c buses you want to use.
 
 		CONFIG_SYS_I2C_DIRECT_BUS
 		define this, if you don't use i2c muxes on your hardware.
@@ -2543,7 +2540,7 @@ CBFS (Coreboot Filesystem) support
 		will skip addresses 0x50 and 0x68 on a board with one I2C bus
 
 			#define CONFIG_I2C_MULTI_BUS
-			#define CONFIG_SYS_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
+			#define CONFIG_SYS_I2C_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
 
 		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
 
-- 
2.8.0.rc3.226.g39d4020