[U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets
Jagan Teki
jagan at openedev.com
Sat Oct 22 19:10:08 CEST 2016
On Fri, Oct 21, 2016 at 6:54 AM, Andre Przywara <andre.przywara at arm.com> wrote:
> OHCI has a known limitation of allowing only 32-bit DMA buffer
> addresses, so we have a lot of u32 variables around, which are assigned
> to pointers and vice versa. This obviously creates issues with 64-bit
> systems, so the compiler complains here and there.
> To allow compilation for 64-bit boards which use only memory below 4GB
> anyway (and to avoid more invasive fixes), adjust some casts and types
> and assume that the EDs and TDs are all located in the lower 4GB.
> This fixes compilation of the OHCI driver for the Pine64.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/usb/host/ohci-hcd.c | 21 +++++++++++----------
> drivers/usb/host/ohci-sunxi.c | 2 +-
> drivers/usb/host/ohci.h | 11 +++++++----
> 3 files changed, 19 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index ccbfc02..0f6d03e 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -682,7 +682,7 @@ static int ep_link(ohci_t *ohci, ed_t *edi)
> ed->hwNextED = 0;
> flush_dcache_ed(ed);
> if (ohci->ed_controltail == NULL)
> - ohci_writel(ed, &ohci->regs->ed_controlhead);
> + ohci_writel((uintptr_t)ed, &ohci->regs->ed_controlhead);
> else
> ohci->ed_controltail->hwNextED =
> m32_swap((unsigned long)ed);
> @@ -700,7 +700,7 @@ static int ep_link(ohci_t *ohci, ed_t *edi)
> ed->hwNextED = 0;
> flush_dcache_ed(ed);
> if (ohci->ed_bulktail == NULL)
> - ohci_writel(ed, &ohci->regs->ed_bulkhead);
> + ohci_writel((uintptr_t)ed, &ohci->regs->ed_bulkhead);
> else
> ohci->ed_bulktail->hwNextED =
> m32_swap((unsigned long)ed);
> @@ -753,7 +753,7 @@ static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
>
> /* ED might have been unlinked through another path */
> while (*ed_p != 0) {
> - if (((struct ed *)
> + if (((struct ed *)(uintptr_t)
> m32_swap((unsigned long)ed_p)) == ed) {
> *ed_p = ed->hwNextED;
> aligned_ed_p = (unsigned long)ed_p;
> @@ -762,7 +762,7 @@ static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
> aligned_ed_p + ARCH_DMA_MINALIGN);
> break;
> }
> - ed_p = &(((struct ed *)
> + ed_p = &(((struct ed *)(uintptr_t)
> m32_swap((unsigned long)ed_p))->hwNextED);
> }
> }
> @@ -798,7 +798,7 @@ static int ep_unlink(ohci_t *ohci, ed_t *edi)
> if (ohci->ed_controltail == ed) {
> ohci->ed_controltail = ed->ed_prev;
> } else {
> - ((ed_t *)m32_swap(
> + ((ed_t *)(uintptr_t)m32_swap(
> *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
> }
> break;
> @@ -819,7 +819,7 @@ static int ep_unlink(ohci_t *ohci, ed_t *edi)
> if (ohci->ed_bulktail == ed) {
> ohci->ed_bulktail = ed->ed_prev;
> } else {
> - ((ed_t *)m32_swap(
> + ((ed_t *)(uintptr_t)m32_swap(
> *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
> }
> break;
> @@ -914,12 +914,13 @@ static void td_fill(ohci_t *ohci, unsigned int info,
>
> /* fill the old dummy TD */
> td = urb_priv->td [index] =
> - (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
> + (td_t *)(uintptr_t)
> + (m32_swap(urb_priv->ed->hwTailP) & ~0xf);
>
> td->ed = urb_priv->ed;
> td->next_dl_td = NULL;
> td->index = index;
> - td->data = (__u32)data;
> + td->data = (uintptr_t)data;
> #ifdef OHCI_FILL_TRACE
> if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
> for (i = 0; i < len; i++)
> @@ -1099,7 +1100,7 @@ static void check_status(td_t *td_list)
> * we reverse the reversed done-list */
> static td_t *dl_reverse_done_list(ohci_t *ohci)
> {
> - __u32 td_list_hc;
> + uintptr_t td_list_hc;
> td_t *td_rev = NULL;
> td_t *td_list = NULL;
>
> @@ -1862,7 +1863,7 @@ static int hc_start(ohci_t *ohci)
> ohci_writel(0, &ohci->regs->ed_controlhead);
> ohci_writel(0, &ohci->regs->ed_bulkhead);
>
> - ohci_writel((__u32)ohci->hcca,
> + ohci_writel((uintptr_t)ohci->hcca,
> &ohci->regs->hcca); /* reset clears this */
>
> fminterval = 0x2edf;
> diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
> index 2a1e8bf..0689374 100644
> --- a/drivers/usb/host/ohci-sunxi.c
> +++ b/drivers/usb/host/ohci-sunxi.c
> @@ -51,7 +51,7 @@ static int ohci_usb_probe(struct udevice *dev)
> extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
> #endif
> priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
> - priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
> + priv->phy_index = ((uintptr_t)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
> priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> priv->usb_gate_mask <<= priv->phy_index;
> diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
> index 9b0c4a2..db0924c 100644
> --- a/drivers/usb/host/ohci.h
> +++ b/drivers/usb/host/ohci.h
> @@ -10,12 +10,15 @@
> /*
> * e.g. PCI controllers need this
> */
> +
> +#include <asm/io.h>
> +
> #ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
> -# define ohci_readl(a) __swap_32(*((volatile u32 *)(a)))
> -# define ohci_writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
> +# define ohci_readl(a) __swap_32(readl(a))
> +# define ohci_writel(v, a) writel(__swap_32(v), a)
Not sure about writel here, why v? volatile casting to a here becomes v?
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list