[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL

[Fabio Estevam]

On Sat, Sep 3, 2016 at 5:22 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> i.MX6UL GEA M6UL modules are system on module solutions manufactured
> by Engicam with following characteristics:
> Processor       NXP i.MX 6UltraLite MCIMX6G2, 528 MHz
> RAM             128MB, 16-bit DDR3
> NAND SLC        256MB
> Power supply    Single 5V
> MAX LCD RES     up to WXGA, 1366x768
>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  arch/arm/cpu/armv7/mx6/Kconfig    |  6 ++++++
>  board/freescale/mx6ul/Kconfig     |  2 +-

This file does not exist.

>  board/freescale/mx6ul/MAINTAINERS |  5 +++++
>  board/freescale/mx6ul/board.c     |  4 +++-

This file does not exist.

>  configs/mx6ul_geam_kit_defconfig  | 11 +++++++++++
>  include/configs/mx6ul.h           |  1 +

This file does not exist.

You should generate a patch against u-boot-imx git tree.