[U-Boot] [PATCH v1 2/6] video: fsl_dcu_fb: fix framebuffer to the end of memory

Sanchayan Maity maitysanchayan at gmail.com
Mon Feb 6 07:30:30 UTC 2017


From: Stefan Agner <stefan.agner at toradex.com>

Fix the framebuffer location to the very end of the available memory.
This allows to remove the area from available memory for the kernel,
which in turn allows to display the splash screen through the while
Linux kernel boot process.

Ideas has been taken from the sunxi display driver, e.g.
20779ec3a5 ("sunxi: video: Dynamically reserve framebuffer memory")

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
 drivers/video/Kconfig      |  8 ++++++++
 drivers/video/fsl_dcu_fb.c | 46 +++++++++++++++++++++++++++++++++++++++++-----
 include/fsl_dcu_fb.h       |  1 +
 3 files changed, 50 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7097cfa59f..9fea167d0f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -402,6 +402,14 @@ config VIDEO_FSL_DCU_FB
 	 This enables support for Freescale Display Controller Unit (DCU4)
 	 module found on Freescale Vybrid and QorIQ family of SoC's.
 
+config VIDEO_FSL_DCU_MAX_FB_SIZE_MB
+	int "Freescale DCU framebuffer size"
+	depends on VIDEO_FSL_DCU_FB
+	default 4194304
+	help
+	 Set maximum framebuffer size to be used for Freescale Display
+	 Controller Unit (DCU4).
+
 config VIDEO_ROCKCHIP
 	bool "Enable Rockchip video support"
 	depends on DM_VIDEO
diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c
index d4cd382776..a456bd17da 100644
--- a/drivers/video/fsl_dcu_fb.c
+++ b/drivers/video/fsl_dcu_fb.c
@@ -8,6 +8,7 @@
 
 #include <asm/io.h>
 #include <common.h>
+#include <fdt_support.h>
 #include <fsl_dcu_fb.h>
 #include <linux/fb.h>
 #include <malloc.h>
@@ -79,6 +80,8 @@
 #define BPP_24_RGB888			5
 #define BPP_32_ARGB8888			6
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * This setting is used for the TWR_LCD_RGB card
  */
@@ -254,11 +257,16 @@ int fsl_dcu_init(unsigned int xres, unsigned int yres,
 	struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR;
 	unsigned int div, mode;
 
-	/* Memory allocation for framebuffer */
-	info.screen_size =
-		info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8);
-	info.screen_base = (char *)memalign(ARCH_DMA_MINALIGN,
-			roundup(info.screen_size, ARCH_DMA_MINALIGN));
+	if (info.screen_size > CONFIG_VIDEO_FSL_DCU_MAX_FB_SIZE_MB) {
+		info.screen_size = 0;
+		return -ENOMEM;
+	}
+
+	/* Resever framebuffer at the end of memory */
+	gd->fb_base = gd->bd->bi_dram[0].start +
+			gd->bd->bi_dram[0].size - info.screen_size;
+	info.screen_base = (char *)gd->fb_base;
+
 	memset(info.screen_base, 0, info.screen_size);
 
 	reset_total_layers();
@@ -305,6 +313,11 @@ int fsl_dcu_init(unsigned int xres, unsigned int yres,
 	return 0;
 }
 
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	return gd->ram_top - CONFIG_VIDEO_FSL_DCU_MAX_FB_SIZE_MB;
+}
+
 void *video_hw_init(void)
 {
 	static GraphicDevice ctfb;
@@ -363,3 +376,26 @@ void *video_hw_init(void)
 
 	return &ctfb;
 }
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+int fsl_dcu_fixedfb_setup(void *blob)
+{
+	u64 start, size;
+	int ret;
+
+	start = gd->bd->bi_dram[0].start;
+	size = gd->bd->bi_dram[0].size - info.screen_size;
+
+	/*
+	 * Align size on section size (1 MiB).
+	 */
+	size &= 0xfff00000;
+	ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
+	if (ret) {
+		eprintf("Cannot setup fb: Error reserving memory\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
diff --git a/include/fsl_dcu_fb.h b/include/fsl_dcu_fb.h
index 42632984d3..67e29e74e6 100644
--- a/include/fsl_dcu_fb.h
+++ b/include/fsl_dcu_fb.h
@@ -9,6 +9,7 @@
 
 int fsl_dcu_init(unsigned int xres, unsigned int yres,
 		 unsigned int pixel_format);
+int fsl_dcu_fixedfb_setup(void *blob);
 
 /* Prototypes for external board-specific functions */
 int platform_dcu_init(unsigned int xres, unsigned int yres,
-- 
2.11.1



More information about the U-Boot mailing list