[U-Boot] [PATCH 2/2] omapl138_lcdk: Set uboot raw mmc sector to 0x41

[Axel Haslam]

The uboot binary on the AIS file starts at offset 0x8000.
This would be sector 0x40 on a mmc card with 512 bytes per
sector: 0x8000/0x200 = 0x40.

But because we usually skip the first mmc sector to preserve
the partition table, the ais image is written starting
on sector 0x1, and the u-boot binary ends up at sector 0x41.

Set the address of the u-boot binary to 0x41 so that spl
can correctly jump to it.

Signed-off-by: Axel Haslam <ahaslam at baylibre.com>
---
 configs/omapl138_lcdk_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index d20af19..a249ebd 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -12,7 +12,7 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x41
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_CMD_BOOTZ=y
-- 
2.9.3