[U-Boot] [PATCH v5 0/9] rockchip: Add gmac Ethernet support

Romain Perier romain.perier at collabora.com
Wed Jan 4 17:25:32 CET 2017


>From Simon:
This v3 patch is an update on Sjoerd's original v2 series from Feburary.
I have dealt with the changes requested at the time, and adjusted the way
that the speed change is handled.

Tested on firefly-rk3288, rock2.

Original cover letter:
To add support I've taken a slightly different approach then some of the
other boards with a designware IP block, by creating a new driver to
take care of the platfrom glue which subclasses the main designware driver
instead of adding the compatibility string the designware driver
directly and doing the SoC specific setup in the board files. This seems
quite a bit more elegant in a device model based world.

I've only tested this series on a Radxa Rock 2 board, it would be great
if someone could test this on other boards with the designware IP
especially for those with the reset GPIO in devicetree (e.g. some of the
Allwinner boards).

Compared to the first one round the pinctrl related bits were dropped as
RK3288 now has a full pinctrl driver. Furthermore the started hook in the
designware driver was renamed to fix_mac_speed in line with what linux
uses and moved to the dw_link_adjust function.

Changes in v5:
- Changed the commit message for gmac
- Added my Acked-by to few commits

Changes in v4:
- Fix commit message to say 'rk3399'

Changes in v3:
- Add a few new patches
- Add comments for struct gmac_rk3288_platdata
- Add new patch to adjust dw_adjust_link() to return an error
- Add new patch to enable networking on evb-rk3399
- Add new patch to export the operation functions
- Add new patch to split the link init into a separate function
- Adjust binding to use r/tx-delay instead of r/tx_delay
- Drop the 'net: designware: Add a fix_mac_speed hook' patch
- Sort includes
- Use debug() instead of printf() for error
- Use function calls instead of fix_mac_speed() hook
- Use new clk interface

Changes in v2:
- Adjust to new hook name
- Fix various coding style nits

Simon Glass (4):
  net: designware: Adjust dw_adjust_link() to return an error
  net: designware: Split the link init into a separate function
  net: designware: Export the operation functions
  rockchip: evb-rk3339: Enable DHCP

Sjoerd Simons (5):
  net: designware: Export various functions/struct to allow subclassing
  net: gmac_rockchip: Add Rockchip GMAC driver
  rockchip: Enable networking support on rock2 and firefly
  rockchip: Add PXE and DHCP to the default boot targets
  rockchip: Drop Ethernet from the TODO

 configs/evb-rk3399_defconfig      |   3 +
 configs/firefly-rk3288_defconfig  |   4 +
 configs/rock2_defconfig           |   4 +
 doc/README.rockchip               |   1 -
 drivers/net/Kconfig               |   7 ++
 drivers/net/Makefile              |   1 +
 drivers/net/designware.c          |  57 ++++++++++----
 drivers/net/designware.h          |  13 ++++
 drivers/net/gmac_rockchip.c       | 154 ++++++++++++++++++++++++++++++++++++++
 include/configs/rockchip-common.h |   4 +-
 10 files changed, 230 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/gmac_rockchip.c

-- 
2.11.0



More information about the U-Boot mailing list