[U-Boot] [PATCH 42/51] cmd: Add ihs fpga command

[Simon Glass]

Hi Mario,

On 14 July 2017 at 05:55, Mario Six <mario.six at gdsys.cc> wrote:
> Add a comman to debug the IHS FPGA's bus.
>
> Signed-off-by: Mario Six <mario.six at gdsys.cc>
> ---
>
>  cmd/Kconfig    |   5 ++
>  cmd/Makefile   |   1 +
>  cmd/ihs_fpga.c | 269 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 275 insertions(+)
>  create mode 100644 cmd/ihs_fpga.c

This should be more generic as per the driver - e.g. a read/write()
method that supports an access size parameter.

Is there any way we can make some of the code common with things like 'md'?

>
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 4bbe9d435c..6d13c681cb 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -753,6 +753,11 @@ config CMD_SATA
>           Attachment, where AT refers to an IBM AT (Advanced Technology)
>           computer released in 1984.
>
> +config CMD_IHS_FPGA
> +       bool "fpga"
> +       help
> +         Enable the GDSYS IHS FPGA command for accessing the FPGA's regisers.
> +

Regards,
Simon