[U-Boot] [PATCH v2 0/2] rockchip: rk3399: spl: Make baudrate and UART configurable

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Thu Mar 23 22:24:11 UTC 2017


The default configuration for debug output from the RK3399 SPL is
UART2 at 1.5MBaud. While this works reasonably well for the EVB,
custom boards may want to change these settings.

To simplify the enablement (i.e. to use the RS232 connector on our
baseboard and to improve the compatibility with commonly available
RS232-to-UART dongles) for the RK3399-Q7 SoM, we need to make both
the UART and the baudrate configurable.

This patch-series makes CONFIG_BAUDRATE a first-class citizen within
the Kconfig framework (so we can set it via defconfig) and adds the
required iomux support for UART0 in the RK3399 SPL.

Changes in v2:
- Changed hex constant to lowercase

Philipp Tomsich (2):
  rockchip: rk3399: spl: add UART0 support for SPL
  rockchip: config: rk3399: update defconfigs and rk3399_common

 arch/arm/include/asm/arch-rockchip/grf_rk3399.h |  8 +++++++
 arch/arm/mach-rockchip/rk3399-board-spl.c       | 29 ++++++++++++++++++-------
 configs/evb-rk3399_defconfig                    |  2 ++
 configs/puma_defconfig                          |  4 +++-
 include/configs/rk3399_common.h                 |  1 -
 5 files changed, 34 insertions(+), 10 deletions(-)

-- 
1.9.1



More information about the U-Boot mailing list