[U-Boot] sunxi: SATA link timeout fix

[Peter Robinson]

On Wed, Nov 8, 2017 at 11:32 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> On Tue, Nov 7, 2017 at 5:43 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> On Sun, Nov 5, 2017 at 7:11 PM, Werner Böllmann
>> <Werner.Boellmann at fh-dortmund.de> wrote:
>>> After updating u-boot from v2016.01 to 2017.09 i got a "SATA link 0 timeout." on my Cubietruck board.
>>> I tracked this down to this patch.
>>>
>>> http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb.
>>
>> Look like mdelay missing while moving to board file.
>
> Can someone test this?

I boot my Cubietruck off a SATA drive without issues with any of those
intervening releases but it's a SSD so there would be no spin up time
compared to spinning rust, I don't have a spare spinning disk to test
it with though.