[U-Boot] [PATCH v5 0/8] Add support for GE PPD

[Martyn Welch]

On Thu, 2017-11-09 at 11:19 +0100, Lukasz Majewski wrote:
> Hi Martyn,
> 
> > *** Resend due to previous use of unsubscribed email address ***
> 
> Just a small remark.
> 
> You may consider using patman to get the list of u-boot community peers
> to be CC'ed for your patch. Or at least look for a custodian (in
> MAINTAINERS) responsible to IMX (NXP) SoC part of u-boot (in this case
> Stefano Babic or Fabio Estevam).
> 

Ah, OK, I ran get_maintainers and CCed anyone specifically flagged as a
maintainer (which is what I understood to be good practice from the
U-Boot wiki).

I'll bear this in mind and CC those that have made significant
contributions next time.

> The problem with sending code only to u-boot ML is that it may be
> overlooked by people, who are the best candidates to review it.
> 
> > 
> > This series adds support for the GE PPD. The initial patches in this
> > series resolve issues found during development and testing, extend
> > existing support and add new support for devices in the PPD. The final
> > patch in the series adds the board support for the PPD.
> > 
> > Ian Ray (2):
> >   ext4: recover from filesystem corruption when reading
> >   bootcount: add support for bootcounter on EXT filesystem
> > 
> > Martyn Welch (3):
> >   pwm: imx: Enable PWM support on i.MX53
> >   arm: mx5: Add more register definitions
> >   board: ge: make VPD code common
> > 
> > Nandor Han (2):
> >   imx: mxc_i2c: tweak the i2c transfer method
> >   rtc: add support for s35392a
> > 
> > Peter Senna Tschudin (1):
> >   mx53: Add Board support for GE PPD
> > 
> >  README                                   |   7 +
> >  arch/arm/include/asm/arch-mx5/crm_regs.h |   8 +
> >  arch/arm/include/asm/arch-mx5/imx-regs.h |  50 ++++
> >  arch/arm/mach-imx/mx5/Kconfig            |   7 +
> >  board/ge/bx50v3/Makefile                 |   2 +-
> >  board/ge/bx50v3/bx50v3.c                 |   2 +-
> >  board/ge/bx50v3/vpd_reader.c             | 228 ---------------
> >  board/ge/bx50v3/vpd_reader.h             |  25 --
> >  board/ge/common/Makefile                 |   7 +
> >  board/ge/common/vpd_reader.c             | 197 +++++++++++++
> >  board/ge/common/vpd_reader.h             |  17 ++
> >  board/ge/mx53ppd/Kconfig                 |  17 ++
> >  board/ge/mx53ppd/MAINTAINERS             |   7 +
> >  board/ge/mx53ppd/Makefile                |  12 +
> >  board/ge/mx53ppd/imximage.cfg            |  87 ++++++
> >  board/ge/mx53ppd/mx53ppd.c               | 457
> > +++++++++++++++++++++++++++++++
> > board/ge/mx53ppd/mx53ppd_video.c         | 135 +++++++++
> > board/ge/mx53ppd/ppd_gpio.h              |  96 +++++++
> > configs/mx53ppd_defconfig                |  39 +++
> > drivers/Kconfig                          |   2 +
> > drivers/bootcount/Kconfig                |  58 ++++
> > drivers/bootcount/Makefile               |   1 +
> > drivers/bootcount/bootcount_ext.c        |  62 +++++
> > drivers/i2c/mxc_i2c.c                    |  25 +-
> > drivers/pwm/pwm-imx-util.c               |   2 +
> > drivers/rtc/Kconfig                      |   6 +
> > drivers/rtc/Makefile                     |   1 +
> > drivers/rtc/s35392a.c                    | 365
> > ++++++++++++++++++++++++ fs/ext4/ext4_common.c                    |
> > 10 + fs/ext4/ext4fs.c                         |  10 +-
> > include/configs/mx53ppd.h                | 248 +++++++++++++++++
> > lib/Kconfig                              |   3 + 32 files changed,
> > 1927 insertions(+), 266 deletions(-) delete mode 100644
> > board/ge/bx50v3/vpd_reader.c delete mode 100644
> > board/ge/bx50v3/vpd_reader.h create mode 100644
> > board/ge/common/Makefile create mode 100644
> > board/ge/common/vpd_reader.c create mode 100644
> > board/ge/common/vpd_reader.h create mode 100644
> > board/ge/mx53ppd/Kconfig create mode 100644
> > board/ge/mx53ppd/MAINTAINERS create mode 100644
> > board/ge/mx53ppd/Makefile create mode 100644
> > board/ge/mx53ppd/imximage.cfg create mode 100644
> > board/ge/mx53ppd/mx53ppd.c create mode 100644
> > board/ge/mx53ppd/mx53ppd_video.c create mode 100644
> > board/ge/mx53ppd/ppd_gpio.h create mode 100644
> > configs/mx53ppd_defconfig create mode 100644 drivers/bootcount/Kconfig
> >  create mode 100644 drivers/bootcount/bootcount_ext.c
> >  create mode 100644 drivers/rtc/s35392a.c
> >  create mode 100644 include/configs/mx53ppd.h
> > 
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de