[U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address

[Alexander Graf]

Back in the old days, 0x100 was used as the address to pass the device tree
from firmware into the kernel. This has since changed to a more dynamic
location, so using 0x100 actually breaks more things than it helps with.

Let's move the device tree default location for distro boot to a more sane
place that gives us enough head room in low memory.

Reported-by: Tuomas Tynkkynen <tuomas at tuxera.com>
Signed-off-by: Alexander Graf <agraf at suse.de>
---
 include/configs/rpi.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 325e52a019..fcf7e0976b 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -124,7 +124,7 @@
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"fdt_high=ffffffff\0" \
 	"initrd_high=ffffffff\0" \
-	"fdt_addr_r=0x00000100\0" \
+	"fdt_addr_r=0x01f00000\0" \
 	"pxefile_addr_r=0x00100000\0" \
 	"kernel_addr_r=0x01000000\0" \
 	"scriptaddr=0x02000000\0" \
-- 
2.12.3