[U-Boot] [PATCH 20/41] fsl_esdhc: Update usdhc driver to support i.MX8

Peng Fan peng.fan at nxp.com
Mon May 28 12:25:05 UTC 2018


From: Ye Li <ye.li at nxp.com>

Add CONFIG_IMX8 to use the 64bits support in usdhc driver.

Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 4528345c67..1b062ff06d 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -257,7 +257,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 	int timeout;
 	struct fsl_esdhc *regs = priv->esdhc_regs;
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-	defined(CONFIG_MX8M)
+	defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
 	dma_addr_t addr;
 #endif
 	uint wml_value;
@@ -271,7 +271,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 		esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-	defined(CONFIG_MX8M)
+	defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
 		addr = virt_to_phys((void *)(data->dest));
 		if (upper_32_bits(addr))
 			printf("Error found for upper 32 bits\n");
@@ -301,7 +301,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 					wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-	defined(CONFIG_MX8M)
+	defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
 		addr = virt_to_phys((void *)(data->src));
 		if (upper_32_bits(addr))
 			printf("Error found for upper 32 bits\n");
@@ -367,7 +367,7 @@ static void check_and_invalidate_dcache_range
 	unsigned size = roundup(ARCH_DMA_MINALIGN,
 				data->blocks*data->blocksize);
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-	defined(CONFIG_MX8M)
+	defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
 	dma_addr_t addr;
 
 	addr = virt_to_phys((void *)(data->dest));
-- 
2.14.1



More information about the U-Boot mailing list