[U-Boot] [PATCH u-boot] spi: Add Amlogic Meson SPI Flash Controller driver

Neil Armstrong narmstrong at baylibre.com
Mon Nov 12 14:03:31 UTC 2018


Hi,


On 06/11/2018 10:25, Neil Armstrong wrote:
> The Amlogic Meson SoCs embeds a Flash oriented SPI Controller name SPIFC.
> This driver, ported from the Linux meson-spi-spifc driver, add support
> for this controller on the Amlogic Meson GX SoCs in U-Boot.

I found a bug in this driver, I'll send a v2 fixing it.

Neil


> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  drivers/spi/Kconfig       |   8 +
>  drivers/spi/Makefile      |   1 +
>  drivers/spi/meson_spifc.c | 368 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 377 insertions(+)
>  create mode 100644 drivers/spi/meson_spifc.c
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 516188e..838a007 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -116,6 +116,14 @@ config ICH_SPI
>  	  access the SPI NOR flash on platforms embedding this Intel
>  	  ICH IP core.
>  
> +config MESON_SPIFC
> +	bool "Amlogic Meson SPI Flash Controller driver"
> +	depends on ARCH_MESON
> +	help
> +	  Enable the Amlogic Meson SPI Flash Controller SPIFC) driver.
> +	  This driver can be used to access the SPI NOR flash chips on 
> +	  Amlogic Meson SoCs.
> +
>  config MT7621_SPI
>  	bool "MediaTek MT7621 SPI driver"
>  	depends on ARCH_MT7620
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 7242ea7..67b42da 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
>  obj-$(CONFIG_ICH_SPI) +=  ich.o
>  obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
>  obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o
> +obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
>  obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
>  obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
>  obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
> diff --git a/drivers/spi/meson_spifc.c b/drivers/spi/meson_spifc.c
> new file mode 100644
> index 0000000..6fd3d1a
> --- /dev/null
> +++ b/drivers/spi/meson_spifc.c
> @@ -0,0 +1,368 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2014 Beniamino Galvani <b.galvani at gmail.com>
> + * Copyright (C) 2018 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Amlogic Meson SPI Flash Controller driver
> + */
> +
> +#include <common.h>
> +#include <spi.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <regmap.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <linux/bitfield.h>
> +
> +/* register map */
> +#define REG_CMD			0x00
> +#define REG_ADDR		0x04
> +#define REG_CTRL		0x08
> +#define REG_CTRL1		0x0c
> +#define REG_STATUS		0x10
> +#define REG_CTRL2		0x14
> +#define REG_CLOCK		0x18
> +#define REG_USER		0x1c
> +#define REG_USER1		0x20
> +#define REG_USER2		0x24
> +#define REG_USER3		0x28
> +#define REG_USER4		0x2c
> +#define REG_SLAVE		0x30
> +#define REG_SLAVE1		0x34
> +#define REG_SLAVE2		0x38
> +#define REG_SLAVE3		0x3c
> +#define REG_C0			0x40
> +#define REG_B8			0x60
> +#define REG_MAX			0x7c
> +
> +/* register fields */
> +#define CMD_USER		BIT(18)
> +#define CTRL_ENABLE_AHB		BIT(17)
> +#define CLOCK_SOURCE		BIT(31)
> +#define CLOCK_DIV_SHIFT		12
> +#define CLOCK_DIV_MASK		(0x3f << CLOCK_DIV_SHIFT)
> +#define CLOCK_CNT_HIGH_SHIFT	6
> +#define CLOCK_CNT_HIGH_MASK	(0x3f << CLOCK_CNT_HIGH_SHIFT)
> +#define CLOCK_CNT_LOW_SHIFT	0
> +#define CLOCK_CNT_LOW_MASK	(0x3f << CLOCK_CNT_LOW_SHIFT)
> +#define USER_DIN_EN_MS		BIT(0)
> +#define USER_CMP_MODE		BIT(2)
> +#define USER_CLK_NOT_INV	BIT(7)
> +#define USER_UC_DOUT_SEL	BIT(27)
> +#define USER_UC_DIN_SEL		BIT(28)
> +#define USER_UC_MASK		((BIT(5) - 1) << 27)
> +#define USER1_BN_UC_DOUT_SHIFT	17
> +#define USER1_BN_UC_DOUT_MASK	(0xff << 16)
> +#define USER1_BN_UC_DIN_SHIFT	8
> +#define USER1_BN_UC_DIN_MASK	(0xff << 8)
> +#define USER4_CS_POL_HIGH	BIT(23)
> +#define USER4_IDLE_CLK_HIGH	BIT(29)
> +#define USER4_CS_ACT		BIT(30)
> +#define SLAVE_TRST_DONE		BIT(4)
> +#define SLAVE_OP_MODE		BIT(30)
> +#define SLAVE_SW_RST		BIT(31)
> +
> +#define SPIFC_BUFFER_SIZE	64
> +
> +struct meson_spifc_priv {
> +	struct regmap			*regmap;
> +	struct clk			clk;
> +};
> +
> +/**
> + * meson_spifc_wait_ready() - wait for the current operation to terminate
> + * @spifc:	the Meson SPI device
> + * Return:	0 on success, a negative value on error
> + */
> +static int meson_spifc_wait_ready(struct meson_spifc_priv *spifc)
> +{
> +	u32 data;
> +	ulong tbase = get_timer(0);
> +
> +	do {
> +		regmap_read(spifc->regmap, REG_SLAVE, &data);
> +		if (data & SLAVE_TRST_DONE)
> +			return 0;
> +	} while (get_timer(tbase) < 5 * CONFIG_SYS_HZ);
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/**
> + * meson_spifc_drain_buffer() - copy data from device buffer to memory
> + * @spifc:	the Meson SPI device
> + * @buf:	the destination buffer
> + * @len:	number of bytes to copy
> + */
> +static void meson_spifc_drain_buffer(struct meson_spifc_priv *spifc,
> +				     u8 *buf, int len)
> +{
> +	u32 data;
> +	int i = 0;
> +
> +	while (i < len) {
> +		regmap_read(spifc->regmap, REG_C0 + i, &data);
> +
> +		if (len - i >= 4) {
> +			*((u32 *)buf) = data;
> +			buf += 4;
> +		} else {
> +			memcpy(buf, &data, len - i);
> +			break;
> +		}
> +		i += 4;
> +	}
> +}
> +
> +/**
> + * meson_spifc_fill_buffer() - copy data from memory to device buffer
> + * @spifc:	the Meson SPI device
> + * @buf:	the source buffer
> + * @len:	number of bytes to copy
> + */
> +static void meson_spifc_fill_buffer(struct meson_spifc_priv *spifc,
> +				    const u8 *buf, int len)
> +{
> +	u32 data = 0;
> +	int i = 0;
> +
> +	while (i < len) {
> +		if (len - i >= 4)
> +			data = *(u32 *)buf;
> +		else
> +			memcpy(&data, buf, len - i);
> +
> +		regmap_write(spifc->regmap, REG_C0 + i, data);
> +
> +		buf += 4;
> +		i += 4;
> +	}
> +}
> +
> +/**
> + * meson_spifc_txrx() - transfer a chunk of data
> + * @spifc:	the Meson SPI device
> + * @dout:	data buffer for TX
> + * @din:	data buffer for RX
> + * @offset:	offset of the data to transfer
> + * @len:	length of the data to transfer
> + * @last_xfer:	whether this is the last transfer of the message
> + * @last_chunk:	whether this is the last chunk of the transfer
> + * Return:	0 on success, a negative value on error
> + */
> +static int meson_spifc_txrx(struct meson_spifc_priv *spifc,
> +			    const u8 *dout, u8 *din, int offset,
> +			    int len, bool last_xfer, bool last_chunk)
> +{
> +	bool keep_cs = true;
> +	int ret;
> +
> +	if (dout)
> +		meson_spifc_fill_buffer(spifc, dout + offset, len);
> +
> +	/* enable DOUT stage */
> +	regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK,
> +			   USER_UC_DOUT_SEL);
> +	regmap_write(spifc->regmap, REG_USER1,
> +		     (8 * len - 1) << USER1_BN_UC_DOUT_SHIFT);
> +
> +	/* enable data input during DOUT */
> +	regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS,
> +			   USER_DIN_EN_MS);
> +
> +	if (last_chunk && last_xfer)
> +		keep_cs = false;
> +
> +	regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT,
> +			   keep_cs ? USER4_CS_ACT : 0);
> +
> +	/* clear transition done bit */
> +	regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0);
> +	/* start transfer */
> +	regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER);
> +
> +	ret = meson_spifc_wait_ready(spifc);
> +
> +	if (!ret && din)
> +		meson_spifc_drain_buffer(spifc, din + offset, len);
> +
> +	return ret;
> +}
> +
> +/**
> + * meson_spifc_claim_bus() - claim the SPI bus
> + * @dev:	the SPI controller device
> + */
> +static int meson_spifc_claim_bus(struct udevice *slave)
> +{
> +	struct meson_spifc_priv *spifc = dev_get_priv(slave->parent);
> +	int ret;
> +
> +	ret = clk_enable(&spifc->clk);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +/**
> + * meson_spifc_release_bus() - release the SPI bus
> + * @dev:	the SPI controller device
> + */
> +static int meson_spifc_release_bus(struct udevice *slave)
> +{
> +	struct meson_spifc_priv *spifc = dev_get_priv(slave->parent);
> +
> +	return clk_disable(&spifc->clk);
> +}
> +
> +/**
> + * meson_spifc_xfer() - perform a single transfer
> + * @dev:	the SPI controller device
> + * @bitlen:	length of the transfer
> + * @dout:	data buffer for TX
> + * @din:	data buffer for RX
> + * @flags:	transfer flags
> + * Return:	0 on success, a negative value on error
> + */
> +static int meson_spifc_xfer(struct udevice *slave, unsigned int bitlen,
> +			    const void *dout, void *din, unsigned long flags)
> +{
> +	struct meson_spifc_priv *spifc = dev_get_priv(slave->parent);
> +	int blen = bitlen / 8;
> +	int len, done = 0, ret = 0;
> +
> +	if (bitlen % 8)
> +		return -EINVAL;
> +
> +	debug("xfer len %d (%d) dout %p din %p\n", bitlen, blen, dout, din);
> +
> +	regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0);
> +
> +	while (done < blen && !ret) {
> +		len = min_t(int, blen - done, SPIFC_BUFFER_SIZE);
> +		ret = meson_spifc_txrx(spifc, dout, din, done, len,
> +				       flags & SPI_XFER_END,
> +				       done + len >= blen);
> +		done += len;
> +	}
> +
> +	regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB,
> +			   CTRL_ENABLE_AHB);
> +
> +	return ret;
> +}
> +
> +/**
> + * meson_spifc_set_speed() - program the clock divider
> + * @dev:	the SPI controller device
> + * @speed:	desired speed in Hz
> + */
> +static int meson_spifc_set_speed(struct udevice *dev, uint speed)
> +{
> +	struct meson_spifc_priv *spifc = dev_get_priv(dev);
> +	unsigned long parent, value;
> +	int n;
> +
> +	parent = clk_get_rate(&spifc->clk);
> +	n = max_t(int, parent / speed - 1, 1);
> +
> +	debug("parent %lu, speed %u, n %d\n", parent, speed, n);
> +
> +	value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK;
> +	value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK;
> +	value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) &
> +		CLOCK_CNT_HIGH_MASK;
> +
> +	regmap_write(spifc->regmap, REG_CLOCK, value);
> +
> +	return 0;
> +}
> +
> +/**
> + * meson_spifc_set_mode() - setups the SPI bus mode
> + * @dev:	the SPI controller device
> + * @mode:	desired mode bitfield
> + * Return:	0 on success, -ENODEV on error
> + */
> +static int meson_spifc_set_mode(struct udevice *dev, uint mode)
> +{
> +	struct meson_spifc_priv *spifc = dev_get_priv(dev);
> +
> +	if (mode & (SPI_CPHA | SPI_RX_QUAD | SPI_RX_DUAL |
> +		    SPI_TX_QUAD | SPI_TX_DUAL))
> +		return -ENODEV;
> +
> +	regmap_update_bits(spifc->regmap, REG_USER, USER_CLK_NOT_INV,
> +			   mode & SPI_CPOL ? USER_CLK_NOT_INV : 0);
> +
> +	regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_POL_HIGH,
> +			   mode & SPI_CS_HIGH ? USER4_CS_POL_HIGH : 0);
> +
> +	return 0;
> +}
> +
> +/**
> + * meson_spifc_hw_init() - reset and initialize the SPI controller
> + * @spifc:	the Meson SPI device
> + */
> +static void meson_spifc_hw_init(struct meson_spifc_priv *spifc)
> +{
> +	/* reset device */
> +	regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST,
> +			   SLAVE_SW_RST);
> +	/* disable compatible mode */
> +	regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0);
> +	/* set master mode */
> +	regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0);
> +}
> +
> +static const struct dm_spi_ops meson_spifc_ops = {
> +	.claim_bus	= meson_spifc_claim_bus,
> +	.release_bus	= meson_spifc_release_bus,
> +	.xfer		= meson_spifc_xfer,
> +	.set_speed	= meson_spifc_set_speed,
> +	.set_mode	= meson_spifc_set_mode,
> +};
> +
> +static int meson_spifc_probe(struct udevice *dev)
> +{
> +	struct meson_spifc_priv *priv = dev_get_priv(dev);
> +	int ret;
> +
> +	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_get_by_index(dev, 0, &priv->clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_enable(&priv->clk);
> +	if (ret)
> +		return ret;
> +
> +	meson_spifc_hw_init(priv);
> +
> +	ret = clk_disable(&priv->clk);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct udevice_id meson_spifc_ids[] = {
> +	{ .compatible = "amlogic,meson-gxbb-spifc", },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(meson_spifc) = {
> +	.name		= "meson_spifc",
> +	.id		= UCLASS_SPI,
> +	.of_match	= meson_spifc_ids,
> +	.ops		= &meson_spifc_ops,
> +	.probe		= meson_spifc_probe,
> +	.priv_auto_alloc_size = sizeof(struct meson_spifc_priv),
> +};
> 



More information about the U-Boot mailing list