[U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode

[Igor Opaniuk]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

NXP downstream kernel uses legacy method to enable other cores,
which requires kernel to run in a security mode (althought upstream kernel
uses PSCI for this).

As we're using NXP kernel in our BSPs, lets enable this by default.

Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 include/configs/colibri_imx7.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 40173b18fa..5408577661 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -164,7 +164,8 @@
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
-		",${baudrate}n8 ${memargs} consoleblank=0\0" \
+		",${baudrate}n8 ${memargs} consoleblank=0; " \
+		"setenv bootm_boot_mode sec\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
-- 
2.17.1