[PATCH v2 6/6] cmd: Add MBR partition layout control utility

Marek Szyprowski m.szyprowski at samsung.com
Tue Dec 22 15:09:14 CET 2020


Add a 'mbr' command to let user create or verify MBR partition layout
based on the provided text description. The partition layout is
altearnatively read from 'mbr_parts' environment variable. This can be
used in scripts to help system image flashing tools to ensure proper
partition layout.

The syntax of the text description of the partition list is similar to
the one used by the 'gpt' command. Supported parameters are: name
(currently ignored), start (partition start offset in bytes), size (in
bytes or '-' to expand it to the whole free area), bootable (boolean
flag) and id (MBR partition system ID). If one wants to create more than
4 partitions, an 'Extended' primary partition (with 0x05 ID) has to be
explicitely provided as a one of the first 4 entries.

Here is the example how to create a 6 partitions (3 on the 'extended
volume'), some of the predefined sizes:

> setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e;
  name=rootfs,size=3072M,id=0x83;
  name=system-data,size=512M,id=0x83;
  name=[ext],size=-,id=0x05;
  name=user,size=-,id=0x83;
  name=modules,size=100M,id=0x83;
  name=ramdisk,size=8M,id=0x83'
> mbr write mmc 0

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
 cmd/Kconfig         |   8 ++
 cmd/Makefile        |   1 +
 cmd/mbr.c           | 314 ++++++++++++++++++++++++++++++++++++++++++++
 doc/usage/index.rst |   1 +
 doc/usage/mbr.rst   |  93 +++++++++++++
 5 files changed, 417 insertions(+)
 create mode 100644 cmd/mbr.c
 create mode 100644 doc/usage/mbr.rst

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 1595de999b..2c3358e359 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1025,6 +1025,14 @@ config CMD_LSBLK
 	  Print list of available block device drivers, and for each, the list
 	  of known block devices.
 
+config CMD_MBR
+	bool "MBR (Master Boot Record) command"
+	select DOS_PARTITION
+	select HAVE_BLOCK_DEVICE
+	help
+	  Enable the 'mbr' command to ready and write MBR (Master Boot Record)
+	  style partition tables.
+
 config CMD_MISC
 	bool "misc"
 	depends on MISC
diff --git a/cmd/Makefile b/cmd/Makefile
index dd86675bf2..41379d9a0e 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -178,6 +178,7 @@ obj-$(CONFIG_CMD_ZFS) += zfs.o
 
 obj-$(CONFIG_CMD_DFU) += dfu.o
 obj-$(CONFIG_CMD_GPT) += gpt.o
+obj-$(CONFIG_CMD_MBR) += mbr.o
 obj-$(CONFIG_CMD_ETHSW) += ethsw.o
 obj-$(CONFIG_CMD_AXI) += axi.o
 obj-$(CONFIG_CMD_PVBLOCK) += pvblock.o
diff --git a/cmd/mbr.c b/cmd/mbr.c
new file mode 100644
index 0000000000..da2e3a4722
--- /dev/null
+++ b/cmd/mbr.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * cmd_mbr.c -- MBR (Master Boot Record) handling command
+ *
+ * Copyright (C) 2020 Samsung Electronics
+ * author: Marek Szyprowski <m.szyprowski at samsung.com>
+ *
+ * based on the gpt command.
+ */
+
+#include <common.h>
+#include <blk.h>
+#include <command.h>
+#include <malloc.h>
+#include <part.h>
+
+/**
+ * extract_val() - Extract a value from the key=value pair list
+ * @str: pointer to string with key=values pairs
+ * @key: pointer to the key to search for
+ *
+ * The list of parameters is come separated, only a value for
+ * the given key is returend.
+ *
+ * Function allocates memory for the value, remember to free!
+ *
+ * Return: Pointer to allocated string with the value.
+ */
+static char *extract_val(const char *str, const char *key)
+{
+	char *v, *k;
+	char *s, *strcopy;
+	char *new = NULL;
+
+	strcopy = strdup(str);
+	if (strcopy == NULL)
+		return NULL;
+
+	s = strcopy;
+	while (s) {
+		v = strsep(&s, ",");
+		if (!v)
+			break;
+		k = strsep(&v, "=");
+		if (!k)
+			break;
+		if  (strcmp(k, key) == 0) {
+			new = strdup(v);
+			break;
+		}
+	}
+
+	free(strcopy);
+
+	return new;
+}
+
+/**
+ * found_key() - Search for a key without a value in the parameter list
+ * @str: pointer to string with key
+ * @key: pointer to the key to search for
+ *
+ * The list of parameters is come separated.
+ *
+ * Return: True if key has been found.
+ */
+static bool found_key(const char *str, const char *key)
+{
+	char *k;
+	char *s, *strcopy;
+	bool result = false;
+
+	strcopy = strdup(str);
+	if (!strcopy)
+		return NULL;
+
+	s = strcopy;
+	while (s) {
+		k = strsep(&s, ",");
+		if (!k)
+			break;
+		if  (strcmp(k, key) == 0) {
+			result = true;
+			break;
+		}
+	}
+
+	free(strcopy);
+
+	return result;
+}
+
+static int str_to_partitions(const char *str_part, int blksz,
+	unsigned long *disk_uuid, struct disk_partition **partitions,
+	int *parts_count)
+{
+	char *tok, *str, *s;
+	int i;
+	char *val, *p;
+	int p_count;
+	struct disk_partition *parts;
+	int errno = 0;
+	uint64_t size_ll, start_ll;
+
+	if (str_part == NULL)
+		return -1;
+
+	str = strdup(str_part);
+	if (str == NULL)
+		return -ENOMEM;
+
+	/* extract disk guid */
+	s = str;
+	val = extract_val(str, "uuid_disk");
+	if (val) {
+		val = strsep(&val, ";");
+		p = val;
+		*disk_uuid = ustrtoull(p, &p, 0);
+		free(val);
+		/* Move s to first partition */
+		strsep(&s, ";");
+	}
+	if (s == NULL) {
+		printf("Error: is the partitions string NULL-terminated?\n");
+		return -EINVAL;
+	}
+
+	/* remove the optional semicolon at the end of the string */
+	i = strlen(s) - 1;
+	if (s[i] == ';')
+		s[i] = '\0';
+
+	/* calculate expected number of partitions */
+	p_count = 1;
+	p = s;
+	while (*p) {
+		if (*p++ == ';')
+			p_count++;
+	}
+
+	/* allocate memory for partitions */
+	parts = calloc(sizeof(struct disk_partition), p_count);
+	if (parts == NULL)
+		return -ENOMEM;
+
+	/* retrieve partitions data from string */
+	for (i = 0; i < p_count; i++) {
+		tok = strsep(&s, ";");
+
+		if (tok == NULL)
+			break;
+
+		/* size */
+		val = extract_val(tok, "size");
+		if (!val) { /* 'size' is mandatory */
+			errno = -4;
+			goto err;
+		}
+		p = val;
+		if ((strcmp(p, "-") == 0)) {
+			/* auto extend the size */
+			parts[i].size = 0;
+		} else {
+			size_ll = ustrtoull(p, &p, 0);
+			parts[i].size = size_ll / blksz;
+		}
+		free(val);
+
+		/* start address */
+		val = extract_val(tok, "start");
+		if (val) { /* start address is optional */
+			p = val;
+			start_ll = ustrtoull(p, &p, 0);
+			parts[i].start = start_ll / blksz;
+			free(val);
+		}
+
+		/* system id */
+		val = extract_val(tok, "id");
+		if (!val) { /* '' is mandatory */
+			errno = -4;
+			goto err;
+		}
+		p = val;
+		parts[i].sys_ind = ustrtoul(p, &p, 0);
+		free(val);
+
+		/* bootable */
+		if (found_key(tok, "bootable"))
+			parts[i].bootable = PART_BOOTABLE;
+	}
+
+	*parts_count = p_count;
+	*partitions = parts;
+	free(str);
+
+	return 0;
+err:
+	free(str);
+	free(parts);
+
+	return errno;
+}
+
+static int do_write_mbr(struct blk_desc *dev, const char *str)
+{
+	unsigned long disk_uuid = 0;
+	struct disk_partition *partitions;
+	int blksz = dev->blksz;
+	int count;
+
+	if (str_to_partitions(str, blksz, &disk_uuid, &partitions, &count)) {
+		printf("MBR: failed to setup partitions from \"%s\"\n", str);
+		return -1;
+	}
+
+	if (layout_mbr_partitions(partitions, count, dev->lba)) {
+		printf("MBR: failed to layout partitions on the device\n");
+		free(partitions);
+		return -1;
+	}
+
+	if (write_mbr_partitions(dev, partitions, count, disk_uuid)) {
+		printf("MBR: failed to write partitions to the device\n");
+		free(partitions);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int do_verify_mbr(struct blk_desc *dev, const char *str)
+{
+	unsigned long disk_uuid = 0;
+	struct disk_partition *partitions;
+	int blksz = dev->blksz;
+	int count, i, ret = 1;
+
+	if (str_to_partitions(str, blksz, &disk_uuid, &partitions, &count)) {
+		printf("MBR: failed to setup partitions from \"%s\"\n", str);
+		return -1;
+	}
+
+	for (i = 0; i < count; i++) {
+		struct disk_partition p;
+
+		if (part_get_info(dev, i+1, &p))
+			goto fail;
+
+		if ((partitions[i].size && p.size < partitions[i].size) ||
+		    (partitions[i].start && p.start < partitions[i].start) ||
+		    (p.sys_ind != partitions[i].sys_ind))
+			goto fail;
+	}
+	ret = 0;
+fail:
+	free(partitions);
+	return ret;
+}
+
+static int do_mbr(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	const char *parts = NULL;
+	int ret = CMD_RET_SUCCESS;
+	int dev = 0;
+	char *ep;
+	struct blk_desc *blk_dev_desc = NULL;
+
+	if (argc != 4 && argc != 5)
+		return CMD_RET_USAGE;
+
+	dev = (int)simple_strtoul(argv[3], &ep, 10);
+	if (!ep || ep[0] != '\0') {
+		printf("'%s' is not a number\n", argv[3]);
+		return CMD_RET_USAGE;
+	}
+	blk_dev_desc = blk_get_dev(argv[2], dev);
+	if (!blk_dev_desc) {
+		printf("%s: %s dev %d NOT available\n",
+		       __func__, argv[2], dev);
+		return CMD_RET_FAILURE;
+	}
+
+	if ((strcmp(argv[1], "write") == 0)) {
+		parts = (argc == 5) ? argv[4] : env_get("mbr_parts");
+		printf("MBR: write ");
+		ret = do_write_mbr(blk_dev_desc, parts);
+	} else if ((strcmp(argv[1], "verify") == 0)) {
+		printf("MBR: verify ");
+		parts = (argc == 5) ? argv[4] : env_get("mbr_parts");
+		ret = do_verify_mbr(blk_dev_desc, parts);
+	} else {
+		return CMD_RET_USAGE;
+	}
+
+	if (ret) {
+		printf("error!\n");
+		return CMD_RET_FAILURE;
+	}
+
+	printf("success!\n");
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(mbr, CONFIG_SYS_MAXARGS, 1, do_mbr,
+	"MBR (Master Boot Record)",
+	"<command> <interface> <dev> <partitions_list>\n"
+	" - MBR partition table restoration utility\n"
+	" Restore or check partition information on a device connected\n"
+	" to the given block interface\n"
+	" Example usage:\n"
+	" mbr write mmc 0 [\"${mbr_parts}\"]\n"
+	" mbr verify mmc 0 [\"${partitions}\"]\n"
+);
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index fbb2c0481c..5869fba189 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -14,4 +14,5 @@ Shell commands
    bootefi
    bootmenu
    button
+   mbr
    pstore
diff --git a/doc/usage/mbr.rst b/doc/usage/mbr.rst
new file mode 100644
index 0000000000..ee27b00c75
--- /dev/null
+++ b/doc/usage/mbr.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mbr command
+===========
+
+Synopsis
+--------
+
+::
+
+    mbr verify [interface] [device no] [partition list]
+    mbr write [interface] [device no] [partition list]
+
+Description
+-----------
+
+The mbr command lets user to create or verify MBR partition layout
+based on the provided text description. The partition layout is
+altearnatively read from 'mbr_parts' environment variable. This can be
+used in scripts to help system image flashing tools to ensure proper
+partition layout.
+
+The syntax of the text description of the partition list is similar to
+the one used by the 'gpt' command.
+
+Supported partition parameters are:
+
+* name (currently ignored)
+* start (partition start offset in bytes)
+* size (in bytes or '-' to expand it to the whole free area)
+* bootable (boolean flag)
+* id (MBR partition system ID)
+
+If one wants to create more than 4 partitions, an 'Extended' primary
+partition (with 0x05 ID) has to be explicitely provided as a one of the
+first 4 entries.
+
+Here is the example how to create a 6 partitions (3 on the 'extended
+volume'), some of the predefined sizes:
+
+::
+
+    => setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e;
+        name=rootfs,size=3072M,id=0x83;
+        name=system-data,size=512M,id=0x83;
+        name=[ext],size=-,id=0x05;
+        name=user,size=-,id=0x83;
+        name=modules,size=100M,id=0x83;
+        name=ramdisk,size=8M,id=0x83'
+    => mbr write mmc 0
+
+To check if the layout on the MMC #0 storage device matches the provided
+text description one has to issue following command (assuming that
+mbr_parts environment variable is set):
+
+::
+
+    => mbr verify mmc 0
+
+The verify sub-command is especially useful in the system update scripts:
+
+::
+    => if mbr verify mmc 0; then
+         echo MBR layout needs to be updated
+         ...
+       fi
+
+The 'mbr write' command returns 0 on success write or -1 on failure.
+
+The 'mbr verify' returns 0 if the layout matches the one on the storage
+device or -1 if not.
+
+Configuration
+-------------
+
+To use the mbr command you must specify CONFIG_CMD_MBR=y.
+
+Return value
+------------
+
+The variable *$?* takes the following values
+
++---+------------------------------+
+| 0 | mbr write was succesful      |
++---+------------------------------+
+| 1 | mbr write failed             |
++---+------------------------------+
+| 0 | mbr verify was succesful     |
++---+------------------------------+
+| 1 | mbr verify was not succesful |
++---+------------------------------+
+|-1 | invalid arguments            |
++---+------------------------------+
-- 
2.17.1



More information about the U-Boot mailing list