[PATCH 2/3] watchdog: rti_wdt: Add support for loading firmware

Jan Kiszka jan.kiszka at siemens.com
Tue Jun 23 08:20:25 CEST 2020


From: Jan Kiszka <jan.kiszka at siemens.com>

To avoid the need of extra boot scripting on AM65x for loading a
watchdog firmware, add the required rproc init and loading logic for the
first R5F core to the watchdog start handler. The firmware itself is
embedded into U-Boot binary.

One possible firmware source is https://github.com/siemens/k3-rti-wdt.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 drivers/watchdog/Kconfig      | 20 ++++++++++++++++++++
 drivers/watchdog/Makefile     |  3 +++
 drivers/watchdog/rti_wdt.c    | 24 ++++++++++++++++++++++++
 drivers/watchdog/rti_wdt_fw.S | 20 ++++++++++++++++++++
 4 files changed, 67 insertions(+)
 create mode 100644 drivers/watchdog/rti_wdt_fw.S

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ee99bd2af1..fd6ab9a85b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -162,6 +162,26 @@ config WDT_K3_RTI
 	  Say Y here if you want to include support for the K3 watchdog
 	  timer (RTI module) available in the K3 generation of processors.
 
+if WDT_K3_RTI
+
+config WDT_K3_RTI_LOAD_FW
+	bool "Load watchdog firmware"
+	depends on REMOTEPROC
+	help
+	  Automatically load the specified firmware image into the MCU R5F
+	  core 0. On the AM65x, this firmware is supposed to handle the expiry
+	  of the watchdog timer, typically by resetting the system.
+
+config WDT_K3_RTI_FW_FILE
+	string "Watchdog firmware image file"
+	default "k3-rti-wdt.fw"
+	depends on WDT_K3_RTI_LOAD_FW
+	help
+	  Firmware image to be embedded into U-Boot and loaded on watchdog
+	  start.
+
+endif
+
 config WDT_SANDBOX
 	bool "Enable Watchdog Timer support for Sandbox"
 	depends on SANDBOX && WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 16bdbf4970..bf58684875 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,7 +28,10 @@ obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
 obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
 obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
 obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
+obj-$(CONFIG_WDT_K3_RTI_LOAD_FW) += rti_wdt_fw.o
 obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
 obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
 obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
 obj-$(CONFIG_WDT_XILINX) += xilinx_wwdt.o
+
+$(obj)/rti_wdt_fw.o: $(shell readlink -f $(CONFIG_WDT_K3_RTI_FW_FILE)) FORCE
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 3089a22da6..786ab61f90 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -14,6 +14,7 @@
 #include <power-domain.h>
 #include <wdt.h>
 #include <asm/io.h>
+#include <remoteproc.h>
 
 /* Timer register set definition */
 #define RTIDWDCTRL		0x90
@@ -37,12 +38,17 @@
 
 #define WDT_PRELOAD_MAX		0xfff
 
+#define RTI_PROC_ID		0
+
 struct rti_wdt_priv {
 	phys_addr_t regs;
 	unsigned int clk_khz;
 	struct power_domain pwrdmn;
 };
 
+extern const u32 rti_wdt_fw[];
+extern const int rti_wdt_fw_size;
+
 static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
 {
 	struct rti_wdt_priv *priv = dev_get_priv(dev);
@@ -58,6 +64,24 @@ static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
 	if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
 		return -EBUSY;
 
+#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
+	ret = rproc_dev_init(RTI_PROC_ID);
+	if (ret) {
+	    fw_error:
+		dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n",
+			RTI_PROC_ID);
+		return ret;
+	}
+
+	ret = rproc_load(RTI_PROC_ID, (ulong)rti_wdt_fw, rti_wdt_fw_size);
+	if (ret)
+		goto fw_error;
+
+	ret = rproc_start(RTI_PROC_ID);
+	if (ret)
+		goto fw_error;
+#endif
+
 	timer_margin = timeout_ms * priv->clk_khz / 1000;
 	timer_margin >>= WDT_PRELOAD_SHIFT;
 	if (timer_margin > WDT_PRELOAD_MAX)
diff --git a/drivers/watchdog/rti_wdt_fw.S b/drivers/watchdog/rti_wdt_fw.S
new file mode 100644
index 0000000000..78d99ff9f2
--- /dev/null
+++ b/drivers/watchdog/rti_wdt_fw.S
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Siemens AG, 2020
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka at siemens.com>
+ */
+
+.section .rodata
+
+.global rti_wdt_fw
+.global rti_wdt_fw_size
+
+rti_wdt_fw:
+.align 4
+.incbin CONFIG_WDT_K3_RTI_FW_FILE
+rti_wdt_fw_end:
+
+rti_wdt_fw_size:
+.int rti_wdt_fw_end - rti_wdt_fw
-- 
2.26.2



More information about the U-Boot mailing list