[PATCH v2 3/8] i2c: i2c-cortina: added CAxxxx I2C support
Heiko Schocher
hs at denx.de
Fri Mar 20 07:25:19 CET 2020
Hello Alex,
Am 20.03.2020 um 01:57 schrieb Alex Nemirovsky:
> From: Arthur Li <arthur.li at cortina-access.com>
>
> Add I2C controller support for Cortina Access CAxxxx SoCs
>
> Signed-off-by: Arthur Li <arthur.li at cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
> CC: Heiko Schocher <hs at denx.de>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> MAINTAINERS | 4 +
> drivers/i2c/Kconfig | 7 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/i2c-cortina.c | 346 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/i2c-cortina.h | 92 ++++++++++++
> 5 files changed, 450 insertions(+)
> create mode 100644 drivers/i2c/i2c-cortina.c
> create mode 100644 drivers/i2c/i2c-cortina.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bb45d3c..b147faa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c
> F: drivers/watchdog/cortina_wdt.c
> F: drivers/serial/serial_cortina.c
> F: drivers/mmc/ca_dw_mmc.c
> +F: drivers/i2c/i2c-cortina.c
> +F: drivers/i2c/i2c-cortina.h
>
> ARM/CZ.NIC TURRIS MOX SUPPORT
> M: Marek Behun <marek.behun at nic.cz>
> @@ -672,6 +674,8 @@ F: drivers/gpio/cortina_gpio.c
> F: drivers/watchdog/cortina_wdt.c
> F: drivers/serial/serial_cortina.c
> F: drivers/mmc/ca_dw_mmc.c
> +F: drivers/i2c/i2c-cortina.c
> +F: drivers/i2c/i2c-cortina.h
>
> MIPS MSCC
> M: Gregory CLEMENT <gregory.clement at bootlin.com>
> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> index 03d2fed..b98a4aa 100644
> --- a/drivers/i2c/Kconfig
> +++ b/drivers/i2c/Kconfig
> @@ -85,6 +85,13 @@ config SYS_I2C_CADENCE
> Say yes here to select Cadence I2C Host Controller. This controller is
> e.g. used by Xilinx Zynq.
>
> +config SYS_I2C_CA
> + tristate "Cortina-Access I2C Controller"
> + depends on DM_I2C && CORTINA_PLATFORM
> + default n
> + help
> + Say yes here to select Cortina-Access I2C Host Controller.
> +
> config SYS_I2C_DAVINCI
> bool "Davinci I2C Controller"
> depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index f5a471f..5d18cf7 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o
> obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
> obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
> obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
> +obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
> obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
> obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
> ifdef CONFIG_DM_PCI
> diff --git a/drivers/i2c/i2c-cortina.c b/drivers/i2c/i2c-cortina.c
> new file mode 100644
> index 0000000..99c63f3
> --- /dev/null
> +++ b/drivers/i2c/i2c-cortina.c
> @@ -0,0 +1,346 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2020
> + * Arthur Li, Cortina Access, arthur.li at cortina-access.com.
> + */
> +
> +#include <common.h>
> +#include <i2c.h>
> +#include <asm/io.h>
> +#include <dm.h>
> +#include <mapmem.h>
> +#include "i2c-cortina.h"
> +
> +static void set_speed(struct i2c_regs *regs, int i2c_spd)
> +{
> + union ca_biw_cfg i2c_cfg;
> +
> + i2c_cfg.wrd = readl(®s->i2c_cfg);
> + i2c_cfg.bf.core_en = 0;
> + writel(i2c_cfg.wrd, ®s->i2c_cfg);
> +
> + switch (i2c_spd) {
> + case IC_SPEED_MODE_MAX:
> + i2c_cfg.bf.prer =
> + CORTINA_PER_IO_FREQ / (5 * I2C_MAX_SPEED) - 1;
> + break;
> +
> + case IC_SPEED_MODE_STANDARD:
> + i2c_cfg.bf.prer =
> + CORTINA_PER_IO_FREQ / (5 * I2C_STANDARD_SPEED) - 1;
> + break;
> +
> + case IC_SPEED_MODE_FAST:
> + default:
> + i2c_cfg.bf.prer =
> + CORTINA_PER_IO_FREQ / (5 * I2C_FAST_SPEED) - 1;
> + break;
> + }
> +
> + i2c_cfg.bf.core_en = 1;
> + writel(i2c_cfg.wrd, ®s->i2c_cfg);
> +}
> +
> +static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> + int i2c_spd;
> +
> + if (speed >= I2C_MAX_SPEED) {
> + i2c_spd = IC_SPEED_MODE_MAX;
> + priv->speed = I2C_MAX_SPEED;
> + } else if (speed >= I2C_FAST_SPEED) {
> + i2c_spd = IC_SPEED_MODE_FAST;
> + priv->speed = I2C_FAST_SPEED;
> + } else {
> + i2c_spd = IC_SPEED_MODE_STANDARD;
> + priv->speed = I2C_STANDARD_SPEED;
> + }
> +
> + set_speed(priv->regs, i2c_spd);
> +
> + return 0;
> +}
> +
> +static int ca_i2c_get_bus_speed(struct udevice *bus)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> +
> + return priv->speed;
> +}
> +
> +static void ca_i2c_init(struct i2c_regs *regs)
> +{
> + union ca_biw_cfg i2c_cfg;
> +
> + i2c_cfg.wrd = readl(®s->i2c_cfg);
> + i2c_cfg.bf.core_en = 0;
> + i2c_cfg.bf.biw_soft_reset = 1;
> + writel(i2c_cfg.wrd, ®s->i2c_cfg);
> + mdelay(10);
> + i2c_cfg.bf.biw_soft_reset = 0;
> + writel(i2c_cfg.wrd, ®s->i2c_cfg);
> +
> + set_speed(regs, IC_SPEED_MODE_STANDARD);
> +
> + i2c_cfg.wrd = readl(®s->i2c_cfg);
> + i2c_cfg.bf.core_en = 1;
> + writel(i2c_cfg.wrd, ®s->i2c_cfg);
> +}
> +
> +static int i2c_wait_complete(struct i2c_regs *regs)
> +{
> + union ca_biw_ctrl i2c_ctrl;
> + unsigned long start_time_bb = get_timer(0);
> +
> + i2c_ctrl.wrd = readl(®s->i2c_ctrl);
> +
> + while (i2c_ctrl.bf.biwdone == 0) {
> + i2c_ctrl.wrd = readl(®s->i2c_ctrl);
> +
> + if (get_timer(start_time_bb) >
> + (unsigned long)(I2C_BYTE_TO_BB)) {
> + printf("%s not done!!!\n", __func__);
> + return 1;
Please use -ETIMEDOUT
> + }
> + }
> +
> + /* Clear done bit */
> + writel(i2c_ctrl.wrd, ®s->i2c_ctrl);
> +
> + return 0;
> +}
> +
> +static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr,
> + int write_read)
> +{
> + writel(i2c_addr | write_read, ®s->i2c_txr);
> +
> + writel(BIW_CTRL_START | BIW_CTRL_WRITE,
> + ®s->i2c_ctrl);
> +
> + i2c_wait_complete(regs);
> +}
> +
> +static int i2c_wait_for_bus_busy(struct i2c_regs *regs)
> +{
> + union ca_biw_ack i2c_ack;
> + unsigned long start_time_bb = get_timer(0);
> +
> + i2c_ack.wrd = readl(®s->i2c_ack);
> +
> + while (i2c_ack.bf.biw_busy) {
> + i2c_ack.wrd = readl(®s->i2c_ack);
> +
> + if (get_timer(start_time_bb) >
> + (unsigned long)(I2C_BYTE_TO_BB)) {
> + printf("%s: timeout!\n", __func__);
> + return 1;
Here too.
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr,
> + int alen, int write_read)
> +{
> + int addr_len = alen;
> +
> + if (i2c_wait_for_bus_busy(regs))
> + return 1;
Add a blank line please
> + /* First cycle must write addr + offset */
> + chip = ((chip & 0x7F) << 1);
> + if (alen == 0 && write_read == I2C_CMD_RD)
> + i2c_setaddress(regs, chip, I2C_CMD_RD);
> + else
> + i2c_setaddress(regs, chip, I2C_CMD_WT);
> +
> + while (alen) {
> + alen--;
> + writel(addr, ®s->i2c_txr);
> + if (write_read == I2C_CMD_RD)
> + writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
> + ®s->i2c_ctrl);
> + else
> + writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
> + i2c_wait_complete(regs);
> + }
> +
> + /* Send address again with Read flag if it's read command */
> + if (write_read == I2C_CMD_RD && addr_len > 0)
> + i2c_setaddress(regs, chip, I2C_CMD_RD);
> +
> + return 0;
> +}
> +
> +static int i2c_xfer_finish(struct i2c_regs *regs)
> +{
> + /* Dummy read makes bus free */
> + writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl);
> + i2c_wait_complete(regs);
> +
> + if (i2c_wait_for_bus_busy(regs)) {
> + printf("Timed out waiting for bus\n");
> + return 1;
return -ETIMEDOUT
> + }
> +
> + return 0;
> +}
> +
> +static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr,
> + int alen, uint8_t *buffer, int len)
> +{
> + unsigned long start_time_rx;
> + int rc = 0;
> +
> + if (i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD))
> + return 1;
please return the return value from i2c_xfer_init()
> +
> + start_time_rx = get_timer(0);
> + while (len) {
> + /* ACK_IN is ack value to send during read.
> + * ack high only on the very last byte!
> + */
> + if (len == 1) {
> + writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP,
> + ®s->i2c_ctrl);
> + } else {
> + writel(BIW_CTRL_READ, ®s->i2c_ctrl);
> + }
remove the brackets, they are not needed.
> +
> + rc = i2c_wait_complete(regs);
> + udelay(1);
> +
> + if (rc == 0) {
> + *buffer++ =
> + (uchar) readl(®s->i2c_rxr);
> + len--;
> + start_time_rx = get_timer(0);
> +
> + } else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
> + return 1;
return -ETIMEDOUT
> + }
> + }
> + i2c_xfer_finish(regs);
> + return rc;
> +}
> +
> +static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr,
> + int alen, uint8_t *buffer, int len)
> +{
> + int rc, nb = len;
> + unsigned long start_time_tx;
> +
> + if (i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT))
> + return 1;
please return the return value from i2c_xfer_init
> +
> + start_time_tx = get_timer(0);
> + while (len) {
> + writel(*buffer, ®s->i2c_txr);
> + if (len == 1) {
> + writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
> + ®s->i2c_ctrl);
> + } else {
> + writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
> + }
also here, the brackets are not needed.
> +
> + rc = i2c_wait_complete(regs);
> +
> + if (rc == 0) {
> + len--;
> + buffer++;
> + start_time_tx = get_timer(0);
> + } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
> + printf("Timed out. i2c write Failed\n");
> + return 1;
return -ETIMEDOUT
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr,
> + uint chip_flags)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> + int ret;
> + u32 tmp;
> +
> + /* Try to read the first location of the chip */
> + ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1);
> + if (ret)
> + ca_i2c_init(priv->regs);
> +
> + return ret;
> +}
> +
> +static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> + int ret;
> +
> + debug("i2c_xfer: %d messages\n", nmsgs);
> + for (; nmsgs > 0; nmsgs--, msg++) {
> + debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
> + if (msg->flags & I2C_M_RD) {
> + ret = ca_i2c_read(priv->regs, msg->addr, 0, 0,
> + msg->buf, msg->len);
> + } else {
> + ret = ca_i2c_write(priv->regs, msg->addr, 0, 0,
> + msg->buf, msg->len);
> + }
here too, brackets are not needed.
> +
> + if (ret) {
> + debug("i2c_write: error sending\n");
wrong printf when you did a read.
> + return -EREMOTEIO;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct dm_i2c_ops ca_i2c_ops = {
> + .xfer = ca_i2c_xfer,
> + .probe_chip = ca_i2c_probe_chip,
> + .set_bus_speed = ca_i2c_set_bus_speed,
> + .get_bus_speed = ca_i2c_get_bus_speed,
> +};
> +
> +static const struct udevice_id ca_i2c_ids[] = {
> + { .compatible = "cortina,ca-i2c", },
> + { }
> +};
> +
> +static int ca_i2c_probe(struct udevice *bus)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> +
> + ca_i2c_init(priv->regs);
> +
> + return 0;
> +}
> +
> +static int ca_i2c_ofdata_to_platdata(struct udevice *bus)
> +{
> + struct ca_i2c *priv = dev_get_priv(bus);
> +
> + priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs));
> + if (!priv->regs) {
> + printf("I2C: base address is invalid\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(i2c_cortina) = {
> + .name = "i2c_cortina",
> + .id = UCLASS_I2C,
> + .of_match = ca_i2c_ids,
> + .ofdata_to_platdata = ca_i2c_ofdata_to_platdata,
> + .probe = ca_i2c_probe,
> + .priv_auto_alloc_size = sizeof(struct ca_i2c),
> + .ops = &ca_i2c_ops,
> + .flags = DM_FLAG_PRE_RELOC,
> +};
> diff --git a/drivers/i2c/i2c-cortina.h b/drivers/i2c/i2c-cortina.h
> new file mode 100644
> index 0000000..f1c3dc7
> --- /dev/null
> +++ b/drivers/i2c/i2c-cortina.h
> @@ -0,0 +1,92 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2019
> + * Cortina Access, <www.cortina-access.com>
> + */
> +
> +#ifndef __CA_I2C_H_
> +#define __CA_I2C_H_
> +
> +#if !defined(__ASSEMBLER__) && !defined(__ASSEMBLY__)
> +struct i2c_regs {
> + u32 i2c_cfg;
> + u32 i2c_ctrl;
> + u32 i2c_txr;
> + u32 i2c_rxr;
> + u32 i2c_ack;
> + u32 i2c_ie0;
> + u32 i2c_int0;
> + u32 i2c_ie1;
> + u32 i2c_int1;
> + u32 i2c_stat;
> +};
> +
> +union ca_biw_cfg {
> + struct biw_cfg {
> + u32 core_en : 1;
> + u32 biw_soft_reset : 1;
> + u32 busywait_en : 1;
> + u32 stretch_en : 1;
> + u32 arb_en : 1;
> + u32 clksync_en : 1;
> + u32 rsrvd1 : 2;
> + u32 spike_cnt : 4;
> + u32 rsrvd2 : 4;
> + u32 prer : 16;
> + } bf;
> + unsigned int wrd;
> +};
> +
> +union ca_biw_ctrl {
> + struct biw_ctrl {
> + u32 biwdone : 1;
> + u32 rsrvd1 : 2;
> + u32 ack_in : 1;
> + u32 write : 1;
> + u32 read : 1;
> + u32 stop : 1;
> + u32 start : 1;
> + u32 rsrvd2 : 24;
> + } bf;
> + unsigned int wrd;
> +};
> +
> +union ca_biw_ack {
> + struct biw_ack {
> + u32 al :1;
> + u32 biw_busy :1;
> + u32 ack_out :1;
> + u32 rsrvd1 :29;
> + } bf;
> + unsigned int wrd;
> +};
> +#endif /* !__ASSEMBLER__*/
> +
> +struct ca_i2c {
> + struct i2c_regs *regs;
> + unsigned int speed;
> +};
> +
> +#define I2C_CMD_WT 0
> +#define I2C_CMD_RD 1
> +
> +#define BIW_CTRL_DONE BIT(0)
> +#define BIW_CTRL_ACK_IN BIT(3)
> +#define BIW_CTRL_WRITE BIT(4)
> +#define BIW_CTRL_READ BIT(5)
> +#define BIW_CTRL_STOP BIT(6)
> +#define BIW_CTRL_START BIT(7)
> +
> +#define I2C_BYTE_TO (CONFIG_SYS_HZ / 500)
> +#define I2C_STOPDET_TO (CONFIG_SYS_HZ / 500)
> +#define I2C_BYTE_TO_BB (10)
> +
> +#define IC_SPEED_MODE_STANDARD 1
> +#define IC_SPEED_MODE_FAST 2
> +#define IC_SPEED_MODE_MAX 3
> +
> +#define I2C_MAX_SPEED 1000000
> +#define I2C_FAST_SPEED 400000
> +#define I2C_STANDARD_SPEED 100000
> +
Not needed, could you please use:
https://gitlab.denx.de/u-boot/u-boot/-/blob/master/include/i2c.h#L44
> +#endif /* __CA_I2C_H_ */
>
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
More information about the U-Boot
mailing list