[Uboot-stm32] [PATCH v2] board: stm32mp1: add finished good in board identifier OTP
Patrice CHOTARD
patrice.chotard at st.com
Tue Mar 24 10:11:42 CET 2020
Hi Patrick
On 3/24/20 9:05 AM, Patrick Delaunay wrote:
> Update the command stboard to support the updated coding of OTP 59 with
> finished good.
>
> The ST product codification have several element
> - "Commercial Product Name" (CPN): type of product board (DKX, EVX)
> associated to the board ID "MBxxxx"
> - "Finished Good" or "Finish Good" (FG):
> effective content of the product without chip STM32MP1 (LCD, Wifi, …)
> - BOM: cost variant for same FG
> (for example, several provider of the same component)
>
> For example
> - commercial product = STM32MP157C-EV1
> - Finished Good = EVA32MP157A1$AU1
>
> Booth information are written on board and this information is also saved
> in OTP59:
s/Booth/Both
s/this information is/these information are
>
> bit [31:16] (hex) => Board id, MBxxxx
> bit [15:12] (dec) => Variant CPN (1....15)
> bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
> bit [7:4] (dec) => Variant FG : finished good (NEW)
> bit [3:0] (dec) => BOM (01, .... 255)
>
> The updated command is:
> stboard [-y] <Board> <VarCPN> <Revision> <VarFG> <BOM>
>
> And the displayed STMicroelectronics board identification is:
> Board: MB<Board> Var<VarCPN>.<VarFG> Rev.<Revision>-<BOM>
>
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
> Changes in v2:
> - update commit message
> - add comments in cmd_stboard.c
>
> board/st/common/cmd_stboard.c | 60 ++++++++++++++++++++++++++++-------
> board/st/stm32mp1/stm32mp1.c | 4 ++-
> 2 files changed, 52 insertions(+), 12 deletions(-)
>
> diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c
> index 1573e35410..78f99daead 100644
> --- a/board/st/common/cmd_stboard.c
> +++ b/board/st/common/cmd_stboard.c
> @@ -1,6 +1,32 @@
> // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> /*
> * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
> + *
> + * the st command stboard supports the STMicroelectronics board identification
> + * saved in OTP 59.
> + *
> + * The ST product codification have several element
> + * - "Commercial Product Name" (CPN): type of product board (DKX, EVX)
> + * associated to the board ID "MBxxxx"
> + * - "Finished Good" or "Finish Good" (FG):
> + * effective content of the product without chip STM32MP1xx (LCD, Wifi,…)
> + * - BOM: cost variant for same FG (for example, several provider of the same
> + * component)
> + *
> + * For example
> + * - commercial product = STM32MP157C-EV1 for board MB1263
> + * - Finished Good = EVA32MP157A1$AU1
> + *
> + * Booth information are written on board and this information is also saved
> + * in OTP59, with:
> + * bit [31:16] (hex) => Board id, MBxxxx
> + * bit [15:12] (dec) => Variant CPN (1....15)
> + * bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
> + * bit [7:4] (dec) => Variant FG : finished good index
> + * bit [3:0] (dec) => BOM (01, .... 255)
> + *
> + * and displayed with the format:
> + * Board: MB<Board> Var<VarCPN>.<VarFG> Rev.<Revision>-<BOM>
> */
>
> #ifndef CONFIG_SPL_BUILD
> @@ -13,6 +39,7 @@
> static bool check_stboard(u16 board)
> {
> unsigned int i;
> + /* list of supported ST boards */
> const u16 st_board_id[] = {
> 0x1272,
> 0x1263,
> @@ -31,9 +58,11 @@ static bool check_stboard(u16 board)
>
> static void display_stboard(u32 otp)
> {
> - printf("Board: MB%04x Var%d Rev.%c-%02d\n",
> + /* display board indentification with OPT coding */
> + printf("Board: MB%04x Var%d.%d Rev.%c-%02d\n",
> otp >> 16,
> (otp >> 12) & 0xF,
> + (otp >> 4) & 0xF,
> ((otp >> 8) & 0xF) - 1 + 'A',
> otp & 0xF);
> }
> @@ -44,14 +73,14 @@ static int do_stboard(cmd_tbl_t *cmdtp, int flag, int argc,
> int ret;
> u32 otp, lock;
> u8 revision;
> - unsigned long board, variant, bom;
> + unsigned long board, var_cpn, var_fg, bom;
> struct udevice *dev;
> - int confirmed = argc == 6 && !strcmp(argv[1], "-y");
> + int confirmed = argc == 7 && !strcmp(argv[1], "-y");
>
> argc -= 1 + confirmed;
> argv += 1 + confirmed;
>
> - if (argc != 0 && argc != 4)
> + if (argc != 0 && argc != 5)
> return CMD_RET_USAGE;
>
> ret = uclass_get_device_by_driver(UCLASS_MISC,
> @@ -95,8 +124,8 @@ static int do_stboard(cmd_tbl_t *cmdtp, int flag, int argc,
> return CMD_RET_USAGE;
> }
>
> - if (strict_strtoul(argv[1], 10, &variant) < 0 ||
> - variant == 0 || variant > 15) {
> + if (strict_strtoul(argv[1], 10, &var_cpn) < 0 ||
> + var_cpn == 0 || var_cpn > 15) {
> printf("argument %d invalid: %s\n", 2, argv[1]);
> return CMD_RET_USAGE;
> }
> @@ -107,13 +136,21 @@ static int do_stboard(cmd_tbl_t *cmdtp, int flag, int argc,
> return CMD_RET_USAGE;
> }
>
> - if (strict_strtoul(argv[3], 10, &bom) < 0 ||
> + if (strict_strtoul(argv[3], 10, &var_fg) < 0 ||
> + var_fg > 15) {
> + printf("argument %d invalid: %s\n", 4, argv[3]);
> + return CMD_RET_USAGE;
> + }
> +
> + if (strict_strtoul(argv[4], 10, &bom) < 0 ||
> bom == 0 || bom > 15) {
> printf("argument %d invalid: %s\n", 4, argv[3]);
> return CMD_RET_USAGE;
> }
>
> - otp = (board << 16) | (variant << 12) | (revision << 8) | bom;
> + /* st board indentification value */
> + otp = (board << 16) | (var_cpn << 12) | (revision << 8) |
> + (var_fg << 4) | bom;
> display_stboard(otp);
> printf("=> OTP[%d] = %08X\n", BSEC_OTP_BOARD, otp);
>
> @@ -153,15 +190,16 @@ static int do_stboard(cmd_tbl_t *cmdtp, int flag, int argc,
> return CMD_RET_SUCCESS;
> }
>
> -U_BOOT_CMD(stboard, 6, 0, do_stboard,
> +U_BOOT_CMD(stboard, 7, 0, do_stboard,
> "read/write board reference in OTP",
> "\n"
> " Print current board information\n"
> - "stboard [-y] <Board> <Variant> <Revision> <BOM>\n"
> + "stboard [-y] <Board> <VarCPN> <Revision> <VarFG> <BOM>\n"
> " Write board information\n"
> " - Board: xxxx, example 1264 for MB1264\n"
> - " - Variant: 1 ... 15\n"
> + " - VarCPN: 1...15\n"
> " - Revision: A...O\n"
> + " - VarFG: 0...15\n"
> " - BOM: 1...15\n");
>
> #endif
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index c36e7655c0..f875110076 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -108,13 +108,15 @@ int checkboard(void)
> DM_GET_DRIVER(stm32mp_bsec),
> &dev);
>
> + /* display the STMicroelectronics board identification */
> if (!ret)
> ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD),
> &otp, sizeof(otp));
> if (ret > 0 && otp) {
> - printf("Board: MB%04x Var%d Rev.%c-%02d\n",
> + printf("Board: MB%04x Var%d.%d Rev.%c-%02d\n",
> otp >> 16,
> (otp >> 12) & 0xF,
> + (otp >> 4) & 0xF,
> ((otp >> 8) & 0xF) - 1 + 'A',
> otp & 0xF);
> }
Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
Thanks
Patrice
More information about the U-Boot
mailing list