[PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers

[Michal Simek]

po 24. 8. 2020 v 14:46 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in
> PL and vice versa. That's why change dependencies and do not limit enabling
> just for some platforms.
>
> This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig:
> Change Kconfig dependencies for Xilinx drivers").
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  drivers/serial/Kconfig   | 4 ++--
>  drivers/spi/Kconfig      | 3 ---
>  drivers/usb/host/Kconfig | 3 +--
>  3 files changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index e344677f91f6..b4805a2e4ea4 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -734,7 +734,7 @@ config UNIPHIER_SERIAL
>
>  config XILINX_UARTLITE
>         bool "Xilinx Uarlite support"
> -       depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx)
> +       depends on DM_SERIAL
>         help
>           If you have a Xilinx based board and want to use the uartlite
>           serial ports, say Y to this option. If unsure, say N.
> @@ -802,7 +802,7 @@ config STM32_SERIAL
>
>  config ZYNQ_SERIAL
>         bool "Cadence (Xilinx Zynq) UART support"
> -       depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_ZYNQMP_R5)
> +       depends on DM_SERIAL
>         help
>           This driver supports the Cadence UART. It is found e.g. in Xilinx
>           Zynq/ZynqMP.
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 3fc2d0674ae4..5df97c80fa51 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -407,7 +407,6 @@ config XILINX_SPI
>
>  config ZYNQ_SPI
>         bool "Zynq SPI driver"
> -       depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
>         help
>           Enable the Zynq SPI driver. This driver can be used to
>           access the SPI NOR flash on platforms embedding this Zynq
> @@ -415,7 +414,6 @@ config ZYNQ_SPI
>
>  config ZYNQ_QSPI
>         bool "Zynq QSPI driver"
> -       depends on ARCH_ZYNQ
>         imply SPI_FLASH_BAR
>         help
>           Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
> @@ -425,7 +423,6 @@ config ZYNQ_QSPI
>
>  config ZYNQMP_GQSPI
>         bool "Configure ZynqMP Generic QSPI"
> -       depends on ARCH_ZYNQMP || ARCH_VERSAL
>         help
>           This option is used to enable ZynqMP QSPI controller driver which
>           is used to communicate with qspi flash devices.
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 1c374a7bd809..4eb7b34e245f 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -200,8 +200,7 @@ config USB_EHCI_TEGRA
>
>  config USB_EHCI_ZYNQ
>         bool "Support for Xilinx Zynq on-chip EHCI USB controller"
> -       depends on ARCH_ZYNQ
> -       default y
> +       default y if ARCH_ZYNQ
>         ---help---
>           Enable support for Zynq on-chip EHCI USB controller
>
> --
> 2.28.0
>

Applied.
M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs