[PATCH v2 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy functions

Stefan Roese sr at denx.de
Tue Aug 10 09:13:56 CEST 2021


Ported from https://github.com/ARM-software/optimized-routines

These files are included from this repository, including the latest
git commit ID:
string/aarch64/memcpy.S: afd6244a1f8d
string/aarch64/memset.S: e823e3abf5f8
string/asmdefs.h: e823e3abf5f8

Please note that when adding these optimized functions as default memset
memcpy functions in U-Boot, U-Boot fails to boot on the LX2160ARDB.
After the initial ATF output, no U-Boot output is shown on the serial
console. Some exception is triggered here in the very early boot process
as some of the assembler opcodes need the caches to be enabled.

Because of this, a follow-up patch will add a check to use a simple
non-optimized memset for the "cache disabled" case.

Note:
I also integrated and tested with the Linux versions of these optimized
functions. They are similar to the ones now integrated but these ARM
versions are still a small bit faster.

Signed-off-by: Stefan Roese <sr at denx.de>

---

Changes in v2:
- Add file names and locations and git commit ID from imported files
  to the commit message

 arch/arm/lib/Makefile       |   5 +
 arch/arm/lib/asmdefs.h      |  98 +++++++++++++++
 arch/arm/lib/memcpy-arm64.S | 241 ++++++++++++++++++++++++++++++++++++
 arch/arm/lib/memset-arm64.S | 116 +++++++++++++++++
 4 files changed, 460 insertions(+)
 create mode 100644 arch/arm/lib/asmdefs.h
 create mode 100644 arch/arm/lib/memcpy-arm64.S
 create mode 100644 arch/arm/lib/memset-arm64.S

diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 7f6633271518..c48e1f622d3c 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,8 +39,13 @@ obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
 obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 endif
+ifdef CONFIG_ARM64
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset-arm64.o
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy-arm64.o
+else
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
+endif
 obj-$(CONFIG_SEMIHOSTING) += semihosting.o
 
 obj-y	+= bdinfo.o
diff --git a/arch/arm/lib/asmdefs.h b/arch/arm/lib/asmdefs.h
new file mode 100644
index 000000000000..d307a3a8a25c
--- /dev/null
+++ b/arch/arm/lib/asmdefs.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Macros for asm code.
+ *
+ * Copyright (c) 2019, Arm Limited.
+ */
+
+#ifndef _ASMDEFS_H
+#define _ASMDEFS_H
+
+#if defined(__aarch64__)
+
+/* Branch Target Identitication support.  */
+#define BTI_C		hint	34
+#define BTI_J		hint	36
+/* Return address signing support (pac-ret).  */
+#define PACIASP		hint	25; .cfi_window_save
+#define AUTIASP		hint	29; .cfi_window_save
+
+/* GNU_PROPERTY_AARCH64_* macros from elf.h.  */
+#define FEATURE_1_AND 0xc0000000
+#define FEATURE_1_BTI 1
+#define FEATURE_1_PAC 2
+
+/* Add a NT_GNU_PROPERTY_TYPE_0 note.  */
+#define GNU_PROPERTY(type, value)	\
+  .section .note.gnu.property, "a";	\
+  .p2align 3;				\
+  .word 4;				\
+  .word 16;				\
+  .word 5;				\
+  .asciz "GNU";				\
+  .word type;				\
+  .word 4;				\
+  .word value;				\
+  .word 0;				\
+  .text
+
+/* If set then the GNU Property Note section will be added to
+   mark objects to support BTI and PAC-RET.  */
+#ifndef WANT_GNU_PROPERTY
+#define WANT_GNU_PROPERTY 1
+#endif
+
+#if WANT_GNU_PROPERTY
+/* Add property note with supported features to all asm files.  */
+GNU_PROPERTY (FEATURE_1_AND, FEATURE_1_BTI|FEATURE_1_PAC)
+#endif
+
+#define ENTRY_ALIGN(name, alignment)	\
+  .global name;		\
+  .type name,%function;	\
+  .align alignment;		\
+  name:			\
+  .cfi_startproc;	\
+  BTI_C;
+
+#else
+
+#define END_FILE
+
+#define ENTRY_ALIGN(name, alignment)	\
+  .global name;		\
+  .type name,%function;	\
+  .align alignment;		\
+  name:			\
+  .cfi_startproc;
+
+#endif
+
+#define ENTRY(name)	ENTRY_ALIGN(name, 6)
+
+#define ENTRY_ALIAS(name)	\
+  .global name;		\
+  .type name,%function;	\
+  name:
+
+#define END(name)	\
+  .cfi_endproc;		\
+  .size name, .-name;
+
+#define L(l) .L ## l
+
+#ifdef __ILP32__
+  /* Sanitize padding bits of pointer arguments as per aapcs64 */
+#define PTR_ARG(n)  mov w##n, w##n
+#else
+#define PTR_ARG(n)
+#endif
+
+#ifdef __ILP32__
+  /* Sanitize padding bits of size arguments as per aapcs64 */
+#define SIZE_ARG(n)  mov w##n, w##n
+#else
+#define SIZE_ARG(n)
+#endif
+
+#endif
diff --git a/arch/arm/lib/memcpy-arm64.S b/arch/arm/lib/memcpy-arm64.S
new file mode 100644
index 000000000000..08f0d854868a
--- /dev/null
+++ b/arch/arm/lib/memcpy-arm64.S
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * memcpy - copy memory area
+ *
+ * Copyright (c) 2012-2020, Arm Limited.
+ */
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, unaligned accesses.
+ *
+ */
+
+#include "asmdefs.h"
+
+#define dstin	x0
+#define src	x1
+#define count	x2
+#define dst	x3
+#define srcend	x4
+#define dstend	x5
+#define A_l	x6
+#define A_lw	w6
+#define A_h	x7
+#define B_l	x8
+#define B_lw	w8
+#define B_h	x9
+#define C_l	x10
+#define C_lw	w10
+#define C_h	x11
+#define D_l	x12
+#define D_h	x13
+#define E_l	x14
+#define E_h	x15
+#define F_l	x16
+#define F_h	x17
+#define G_l	count
+#define G_h	dst
+#define H_l	src
+#define H_h	srcend
+#define tmp1	x14
+
+/* This implementation handles overlaps and supports both memcpy and memmove
+   from a single entry point.  It uses unaligned accesses and branchless
+   sequences to keep the code small, simple and improve performance.
+
+   Copies are split into 3 main cases: small copies of up to 32 bytes, medium
+   copies of up to 128 bytes, and large copies.  The overhead of the overlap
+   check is negligible since it is only required for large copies.
+
+   Large copies use a software pipelined loop processing 64 bytes per iteration.
+   The destination pointer is 16-byte aligned to minimize unaligned accesses.
+   The loop tail is handled by always copying 64 bytes from the end.
+*/
+
+ENTRY (memcpy)
+	PTR_ARG (0)
+	PTR_ARG (1)
+	SIZE_ARG (2)
+	add	srcend, src, count
+	add	dstend, dstin, count
+	cmp	count, 128
+	b.hi	L(copy_long)
+	cmp	count, 32
+	b.hi	L(copy32_128)
+
+	/* Small copies: 0..32 bytes.  */
+	cmp	count, 16
+	b.lo	L(copy16)
+	ldp	A_l, A_h, [src]
+	ldp	D_l, D_h, [srcend, -16]
+	stp	A_l, A_h, [dstin]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	/* Copy 8-15 bytes.  */
+L(copy16):
+	tbz	count, 3, L(copy8)
+	ldr	A_l, [src]
+	ldr	A_h, [srcend, -8]
+	str	A_l, [dstin]
+	str	A_h, [dstend, -8]
+	ret
+
+	.p2align 3
+	/* Copy 4-7 bytes.  */
+L(copy8):
+	tbz	count, 2, L(copy4)
+	ldr	A_lw, [src]
+	ldr	B_lw, [srcend, -4]
+	str	A_lw, [dstin]
+	str	B_lw, [dstend, -4]
+	ret
+
+	/* Copy 0..3 bytes using a branchless sequence.  */
+L(copy4):
+	cbz	count, L(copy0)
+	lsr	tmp1, count, 1
+	ldrb	A_lw, [src]
+	ldrb	C_lw, [srcend, -1]
+	ldrb	B_lw, [src, tmp1]
+	strb	A_lw, [dstin]
+	strb	B_lw, [dstin, tmp1]
+	strb	C_lw, [dstend, -1]
+L(copy0):
+	ret
+
+	.p2align 4
+	/* Medium copies: 33..128 bytes.  */
+L(copy32_128):
+	ldp	A_l, A_h, [src]
+	ldp	B_l, B_h, [src, 16]
+	ldp	C_l, C_h, [srcend, -32]
+	ldp	D_l, D_h, [srcend, -16]
+	cmp	count, 64
+	b.hi	L(copy128)
+	stp	A_l, A_h, [dstin]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstend, -32]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	.p2align 4
+	/* Copy 65..128 bytes.  */
+L(copy128):
+	ldp	E_l, E_h, [src, 32]
+	ldp	F_l, F_h, [src, 48]
+	cmp	count, 96
+	b.ls	L(copy96)
+	ldp	G_l, G_h, [srcend, -64]
+	ldp	H_l, H_h, [srcend, -48]
+	stp	G_l, G_h, [dstend, -64]
+	stp	H_l, H_h, [dstend, -48]
+L(copy96):
+	stp	A_l, A_h, [dstin]
+	stp	B_l, B_h, [dstin, 16]
+	stp	E_l, E_h, [dstin, 32]
+	stp	F_l, F_h, [dstin, 48]
+	stp	C_l, C_h, [dstend, -32]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	.p2align 4
+	/* Copy more than 128 bytes.  */
+L(copy_long):
+	/* Use backwards copy if there is an overlap.  */
+	sub	tmp1, dstin, src
+	cbz	tmp1, L(copy0)
+	cmp	tmp1, count
+	b.lo	L(copy_long_backwards)
+
+	/* Copy 16 bytes and then align dst to 16-byte alignment.  */
+
+	ldp	D_l, D_h, [src]
+	and	tmp1, dstin, 15
+	bic	dst, dstin, 15
+	sub	src, src, tmp1
+	add	count, count, tmp1	/* Count is now 16 too large.  */
+	ldp	A_l, A_h, [src, 16]
+	stp	D_l, D_h, [dstin]
+	ldp	B_l, B_h, [src, 32]
+	ldp	C_l, C_h, [src, 48]
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 128 + 16	/* Test and readjust count.  */
+	b.ls	L(copy64_from_end)
+
+L(loop64):
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [src, 16]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [src, 32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [src, 48]
+	stp	D_l, D_h, [dst, 64]!
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 64
+	b.hi	L(loop64)
+
+	/* Write the last iteration and copy 64 bytes from the end.  */
+L(copy64_from_end):
+	ldp	E_l, E_h, [srcend, -64]
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [srcend, -48]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [srcend, -16]
+	stp	D_l, D_h, [dst, 64]
+	stp	E_l, E_h, [dstend, -64]
+	stp	A_l, A_h, [dstend, -48]
+	stp	B_l, B_h, [dstend, -32]
+	stp	C_l, C_h, [dstend, -16]
+	ret
+
+	.p2align 4
+
+	/* Large backwards copy for overlapping copies.
+	   Copy 16 bytes and then align dst to 16-byte alignment.  */
+L(copy_long_backwards):
+	ldp	D_l, D_h, [srcend, -16]
+	and	tmp1, dstend, 15
+	sub	srcend, srcend, tmp1
+	sub	count, count, tmp1
+	ldp	A_l, A_h, [srcend, -16]
+	stp	D_l, D_h, [dstend, -16]
+	ldp	B_l, B_h, [srcend, -32]
+	ldp	C_l, C_h, [srcend, -48]
+	ldp	D_l, D_h, [srcend, -64]!
+	sub	dstend, dstend, tmp1
+	subs	count, count, 128
+	b.ls	L(copy64_from_start)
+
+L(loop64_backwards):
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [srcend, -16]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [srcend, -48]
+	stp	D_l, D_h, [dstend, -64]!
+	ldp	D_l, D_h, [srcend, -64]!
+	subs	count, count, 64
+	b.hi	L(loop64_backwards)
+
+	/* Write the last iteration and copy 64 bytes from the start.  */
+L(copy64_from_start):
+	ldp	G_l, G_h, [src, 48]
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [src, 32]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [src, 16]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [src]
+	stp	D_l, D_h, [dstend, -64]
+	stp	G_l, G_h, [dstin, 48]
+	stp	A_l, A_h, [dstin, 32]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstin]
+	ret
+
+END (memcpy)
diff --git a/arch/arm/lib/memset-arm64.S b/arch/arm/lib/memset-arm64.S
new file mode 100644
index 000000000000..710f6f582cad
--- /dev/null
+++ b/arch/arm/lib/memset-arm64.S
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * memset - fill memory with a constant byte
+ *
+ * Copyright (c) 2012-2021, Arm Limited.
+ */
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, Advanced SIMD, unaligned accesses.
+ *
+ */
+
+#include "asmdefs.h"
+
+#define dstin	x0
+#define val	x1
+#define valw	w1
+#define count	x2
+#define dst	x3
+#define dstend	x4
+#define zva_val	x5
+
+ENTRY (memset)
+	PTR_ARG (0)
+	SIZE_ARG (2)
+
+	dup	v0.16B, valw
+	add	dstend, dstin, count
+
+	cmp	count, 96
+	b.hi	L(set_long)
+	cmp	count, 16
+	b.hs	L(set_medium)
+	mov	val, v0.D[0]
+
+	/* Set 0..15 bytes.  */
+	tbz	count, 3, 1f
+	str	val, [dstin]
+	str	val, [dstend, -8]
+	ret
+	.p2align 4
+1:	tbz	count, 2, 2f
+	str	valw, [dstin]
+	str	valw, [dstend, -4]
+	ret
+2:	cbz	count, 3f
+	strb	valw, [dstin]
+	tbz	count, 1, 3f
+	strh	valw, [dstend, -2]
+3:	ret
+
+	/* Set 17..96 bytes.  */
+L(set_medium):
+	str	q0, [dstin]
+	tbnz	count, 6, L(set96)
+	str	q0, [dstend, -16]
+	tbz	count, 5, 1f
+	str	q0, [dstin, 16]
+	str	q0, [dstend, -32]
+1:	ret
+
+	.p2align 4
+	/* Set 64..96 bytes.  Write 64 bytes from the start and
+	   32 bytes from the end.  */
+L(set96):
+	str	q0, [dstin, 16]
+	stp	q0, q0, [dstin, 32]
+	stp	q0, q0, [dstend, -32]
+	ret
+
+	.p2align 4
+L(set_long):
+	and	valw, valw, 255
+	bic	dst, dstin, 15
+	str	q0, [dstin]
+	cmp	count, 160
+	ccmp	valw, 0, 0, hs
+	b.ne	L(no_zva)
+
+#ifndef SKIP_ZVA_CHECK
+	mrs	zva_val, dczid_el0
+	and	zva_val, zva_val, 31
+	cmp	zva_val, 4		/* ZVA size is 64 bytes.  */
+	b.ne	L(no_zva)
+#endif
+	str	q0, [dst, 16]
+	stp	q0, q0, [dst, 32]
+	bic	dst, dst, 63
+	sub	count, dstend, dst	/* Count is now 64 too large.  */
+	sub	count, count, 128	/* Adjust count and bias for loop.  */
+
+	.p2align 4
+L(zva_loop):
+	add	dst, dst, 64
+	dc	zva, dst
+	subs	count, count, 64
+	b.hi	L(zva_loop)
+	stp	q0, q0, [dstend, -64]
+	stp	q0, q0, [dstend, -32]
+	ret
+
+L(no_zva):
+	sub	count, dstend, dst	/* Count is 16 too large.  */
+	sub	dst, dst, 16		/* Dst is biased by -32.  */
+	sub	count, count, 64 + 16	/* Adjust count and bias for loop.  */
+L(no_zva_loop):
+	stp	q0, q0, [dst, 32]
+	stp	q0, q0, [dst, 64]!
+	subs	count, count, 64
+	b.hi	L(no_zva_loop)
+	stp	q0, q0, [dstend, -64]
+	stp	q0, q0, [dstend, -32]
+	ret
+
+END (memset)
-- 
2.32.0



More information about the U-Boot mailing list